Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM32H0E _59 Vehicle Exterior _060316 WIPER / WASHER _0298087 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
E356879C03
2.167,0.552 2.479,0.802 true 1.938,0.448 2.104,0.635 0.167,0.188 10 true *a 2.656,0.5 2.823,0.688 0.167,0.188 10 true A 2.74,0.802 2.906,0.99 0.167,0.188 10 true A
*a Alignment Mark


Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10.0 mm (0.394 in.)


OK:

The rear wiper stops at the position shown in the illustration.