Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM32H0E _58 Vehicle Interior _060784 THEFT DETERRENT / KEYLESS ENTRY _0298113 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 53510 1.INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for LHD)

a.
E358819C01
1.51,0.896 1.75,0.542 true 1.75,1.198 1.99,0.844 true 0.438,3.115 0.75,3.313 0.313,0.198 10 false *a 1.719,0.365 2.031,0.563 0.313,0.198 10 false *c 1.958,0.656 2.271,0.854 0.313,0.198 10 false *b
*a Component without harness connected
(Engine Hood Courtesy Switch (Hood Lock Assembly))
*b Lock
*c Unlock


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Locked Below 1 Ω
1 - 2 Unlocked 10 kΩ or higher


If the resistance is not as specified, replace the engine hood courtesy switch (hood lock assembly).



Hide 53510 2.INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for RHD)

a.
E358818C01
1.802,0.542 2.094,0.948 true 1.417,0.906 1.823,1.26 true 0.354,3.063 0.667,3.26 0.313,0.198 10 false *a 1.635,0.375 1.948,0.573 0.313,0.198 10 false *c 1.25,0.76 1.563,0.958 0.313,0.198 10 false *b
*a Component without harness connected
(Engine Hood Courtesy Switch (Hood Lock Assembly))
*b Lock
*c Unlock


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Locked Below 1 Ω
1 - 2 Unlocked 10 kΩ or higher


If the resistance is not as specified, replace the engine hood courtesy switch (hood lock assembly).