Home › Drivetrain › GF1A (TRANSFER / 4WD / AWD) › DYNAMIC TORQUE CONTROL AWD SYSTEM
RM32H0E _52 Drivetrain _059725 GF1A TRANSFER / 4WD / AWD _0298220 DYNAMIC TORQUE CONTROL AWD SYSTEM U

GF1A TRANSFER / 4WD / AWD  DYNAMIC TORQUE CONTROL AWD SYSTEM  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION


·

If the following malfunctions occur, the 4WD ECU assembly will stop the function of the dynamic torque control AWD system or partly change the function to control the system.

·

If a malfunction occurs in the sensor signal or actuator, the flow of electricity to the 4WD linear solenoid of the transmission coupling assembly is prohibited. As a result, the system enters front wheel drive condition.

·

When a component of the system malfunctions and the fail-safe function activates, the component operation is prohibited. However, if the system is controlling the component and the fail-safe function activates, the system operation is gradually stopped to prevent sudden changes in the vehicle condition.

·

When system control is not possible, a warning message is displayed to stop system operation.