Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System with Top-mounted Air Conditioner Pressure Sensor)
RM32H0E _58 Vehicle Interior _059841 HEATING / AIR CONDITIONING _0298707 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System with Top-mounted Air Conditioner Pressure Sensor) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System with Top-mounted Air Conditioner Pressure Sensor)  INITIALIZATION  


INITIALIZATION SERVO MOTOR


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch ON.


d.

Press the A/C OFF switch.


e.

Turn the GTS on.


f.

Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.


g.

According to the GTS display, perform servo motor initialization.

Body Electrical > Air Conditioner > Utility
Tester Display
Servomotor Initialization
50005 121 174
HINT:

During initialization, the AUTO indicator light comes on, and then goes off when initialization has finished.



h.

According to the GTS display, select the Exit switch to finish initialization.