Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › 2016.10–2020.08
RM32H0E _58 Vehicle Interior _059622 PRE-COLLISION _0298842 PRE-COLLISION SYSTEM D

PRE-COLLISION  PRE-COLLISION SYSTEM  OPERATION CHECK  


CHECK PRE-COLLISION SYSTEM SETTING


a.

Turn the ignition switch to ON.


b.
B434171C01
0.469,0.167 0.781,0.323 0.313,0.156 10 false *a
*a PCS Warning Light


Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on.

HINT:

When the ignition switch is turned ON, the PCS will turn on. This can be changed through a customize setting using the GTS.



c.

Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.



CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING


a.

Turn the ignition switch to ON.


b.

Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the pre-collision system sensitivity setting displayed on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:
·

Check that the sensitivity setting displayed on the multi-information display changes between "Far", "Mid", and "Near" accordingly.

·

The default setting is "Mid".