Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM32H0E _57 Power Source / Network _059621 NETWORKING _0299023 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


The main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly) control the LIN communication system. LIN communication system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3).

When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.



INSPECT BATTERY VOLTAGE


a.

Measure the battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery.