Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR (for DENSO Made)
RM32H0E _58 Vehicle Interior _059841 HEATING / AIR CONDITIONING _0299519 FRONT BLOWER MOTOR(for DENSO Made) A

HEATING / AIR CONDITIONING  FRONT BLOWER MOTOR(for DENSO Made)  REMOVAL  


PROCEDURE

Hide 55607 1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 87103B 2.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E338126

Disengage the clamp.


b.

Disconnect the connector.


c.

Remove the 3 screws and blower motor with fan sub-assembly.

NOTICE:

Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.