Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 3ZR-FAE)
RM32H0E _54 Brake _060040 BRAKE SYSTEM (OTHER) _0299737 VACUUM PUMP(for 3ZR-FAE) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 3ZR-FAE)  DISASSEMBLY  


PROCEDURE

Hide 29314A 1.REMOVE END COVER

a.
C169334

Using a T25 "TORX" socket wrench, remove the 5 screws and end cover.

NOTICE:
·

Hold the vacuum pump assembly so that its installation surface, fitting parts and oil pipe will not be damaged.

·

As the vacuum pump housing deforms when force is applied, do not hold it with a tool such as a vise.

·

Securely fit the T25 "TORX" socket wrench to the screws.

·

Do not drop the end cover.

·

Do not damage the end cover.




b.
C169336C02
2.063,0.438 1.667,0.438 1.667,0.438 1.406,0.938 true 2.094,0.385 2.625,0.604 0.531,0.219 10 *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the No. 1 O-ring.

NOTICE:

Do not damage the installation groove.



Hide 29331A 2.REMOVE VACUUM PUMP VANE

a.
C142620

Remove the vacuum pump vane together with the 2 vacuum pump vane caps.

NOTICE:
·

When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make note of the installation position and orientation.

·

Do not drop the vacuum pump vane and vacuum pump vane caps.




b.
C169339C12
1.802,1.281 1.802,1.469 false 2.75,1.042 2.75,1.24 false 0.656,1.51 0.656,1.708 false 1.74,1.5 2.24,1.729 0.5,0.229 10 false *2 2.688,1.271 3.156,1.583 0.469,0.313 10 false *1 0.594,1.719 1.25,1.969 0.656,0.25 10 false *1
*1 Vacuum Pump Vane Cap
*2 Vacuum Pump Vane


Remove the 2 vacuum pump vane caps from the vacuum pump vane.

NOTICE:
·

When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation positions and orientation.

·

Do not drop the vacuum pump vane and vacuum pump vane caps.