These DTCs are stored if the headlight ECU sub-assembly LH or RH detects an internal malfunction. The headlight ECU sub-assembly LH stores DTC B242C or B242D.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B242C | Right Headlight ECU Malfunction | An internal malfunction occurs in the headlight ECU sub-assembly RH | Headlight ECU sub-assembly RH | - |
| B242D | Left Headlight ECU Malfunction | An internal malfunction occurs in the headlight ECU sub-assembly LH | Headlight ECU sub-assembly LH | - |
After the headlight ECU sub-assembly LH is replaced, vehicle information registration and initialization are necessary.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>INITIALIZATION
Clear the DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| NEXT |
NEXT
Turn the ignition switch to ON.
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR
DTC B242C and B242D are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (DTC B242C is output) | B |
| NG (DTC B242D is output) | C |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
C