Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM WARNING SWITCH (for RHD)
RM32H0E _54 Brake _060040 BRAKE SYSTEM (OTHER) _0300038 VACUUM WARNING SWITCH(for RHD) A

BRAKE SYSTEM (OTHER)  VACUUM WARNING SWITCH(for RHD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 83390H 2.REMOVE VACUUM WARNING SWITCH ASSEMBLY

a.
C366942

Disconnect the connector from the vacuum warning switch assembly.


b.

Remove the vacuum warning switch assembly from the brake booster assembly.


c.

Remove the check valve grommet from the brake booster assembly.