Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for 3ZR-FAE) › 2016.10–2019.09
RM32H0E _51 Engine / Hybrid System _059516 CRUISE CONTROL _0300549 CRUISE CONTROL SYSTEM(for 3ZR-FAE) U

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for 3ZR-FAE)  TERMINALS OF ECU  


CHECK ECM


C367116N03
2.583,0.167 3.083,0.417 0.5,0.25 5.5,0.167 6,0.417 0.5,0.25 2.708,0.188 3.167,0.385 0.458,0.198 10 false C63 5.625,0.188 6.083,0.385 0.458,0.198 10 false A38

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
C63-65 (D) - C63-59 (E1) Y - W-B D shift position signal Ignition switch ON, shift lever in D 11 to 14 V
C63-65 (D) - C63-59 (E1) Y - W-B D shift position signal Ignition switch ON, shift lever not in D Below 1 V
A38-59 (S) - C63-59 (E1) W - W-B M shift position signal Ignition switch ON, shift lever in M 11 to 14 V
A38-59 (S) - C63-59 (E1) W - W-B M shift position signal Ignition switch ON, shift lever not in M Below 1 V
A38-9 (STP) - C63-59 (E1) R - W-B Stop light switch assembly signal Brake pedal depressed 11 to 14 V
A38-9 (STP) - C63-59 (E1) R - W-B Stop light switch assembly signal Brake pedal released Below 1 V
A38-43 (SFTD) - C63-59 (E1) SB - W-B Down-shift position switch signal Ignition switch ON, shift lever in M 11 to 14 V
A38-43 (SFTD) - C63-59 (E1) SB - W-B Down-shift position switch signal Ignition switch ON, shift lever in "-" Below 1 V
A38-42 (SFTU) - C63-59 (E1) B - W-B Up-shift position switch signal Ignition switch ON, shift lever in M 11 to 14 V
A38-42 (SFTU) - C63-59 (E1) B - W-B Up-shift position switch signal Ignition switch ON, shift lever in "+" Below 1 V
A38-36 (CCS) - A38-35 (ECCS) SB - BR Cruise control main switch circuit Cruise control main switch (ON/OFF button) not pushed 1 MΩ or higher
A38-36 (CCS) - A38-35 (ECCS) SB - BR Cruise control main switch circuit Cruise control main switch (ON/OFF button) pushed Below 2.5 Ω
A38-36 (CCS) - A38-35 (ECCS) SB - BR Cruise control main switch circuit +RES switch ON 235 to 245 Ω
A38-36 (CCS) - A38-35 (ECCS) SB - BR Cruise control main switch circuit -SET switch ON 617 to 643 Ω
A38-36 (CCS) - A38-35 (ECCS) SB - BR Cruise control main switch circuit CANCEL switch ON 1509 to 1571 Ω
A38-10 (ST1-) - C63-59 (E1) G - W-B Stop light switch assembly signal Ignition switch ON, brake pedal depressed Below 1 V
A38-10 (ST1-) - C63-59 (E1) G - W-B Stop light switch assembly signal Ignition switch ON, brake pedal released 11 to 14 V