Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) › 2016.10–2019.09
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0295448 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio receiver assembly through this circuit.

The sound signal that has been sent is amplified by the radio receiver assembly, and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the radio receiver assembly or speakers.

WIRING DIAGRAM

E360333E01
5.583,0.323 6.042,0.521 0.458,0.198 10 false F47 5.583,0.75 6.042,0.948 0.458,0.198 10 false F47 5.604,1.177 6.063,1.375 0.458,0.198 10 false F47 5.604,1.594 6.063,1.792 0.458,0.198 10 false F47 5.594,2.021 6.052,2.219 0.458,0.198 10 false F47 5.635,2.427 6.094,2.625 0.458,0.198 10 false j3 5.646,2.854 6.104,3.052 0.458,0.198 10 false j3 5.656,3.281 6.115,3.479 0.458,0.198 10 false j3 0.458,3.646 0.917,3.844 0.458,0.198 10 false j1 0.448,3.833 2.802,4.115 2.354,0.281 10 false No. 1 Stereo Jack Adapter Assembly 1.24,4.323 3.958,4.656 2.719,0.333 10 false : Data Signal (USB Communication Line) 5.563,3.677 7.156,3.979 1.594,0.302 10 false Radio Receiver Assembly 3.146,3.438 3.896,3.698 0.75,0.26 10 false (Shielded) 3.958,2.135 4.708,2.396 0.75,0.26 10 false (Shielded) 2.323,2.125 3.073,2.385 0.75,0.26 10 false (Shielded) 5.948,0.323 6.448,0.531 0.5,0.208 10 false ADPG 5.958,0.76 6.458,0.969 0.5,0.208 10 false VAR+ 5.958,1.177 6.458,1.385 0.5,0.208 10 false VAL+ 5.958,1.604 6.458,1.813 0.5,0.208 10 false VA- 5.948,2 6.448,2.208 0.5,0.208 10 false AGND 5.958,2.417 6.458,2.625 0.5,0.208 10 false US1- 5.948,2.823 6.448,3.031 0.5,0.208 10 false US1+ 5.948,3.281 6.448,3.49 0.5,0.208 10 false USG1 0.854,0.344 1.354,0.552 0.5,0.208 10 false AUXO 0.938,0.75 1.438,0.958 0.5,0.208 10 false ARO 0.938,1.177 1.438,1.385 0.5,0.208 10 false ALO 0.844,1.583 1.344,1.792 0.5,0.208 10 false ASGN 0.844,2 1.344,2.208 0.5,0.208 10 false AGND 0.896,2.427 1.396,2.635 0.5,0.208 10 false UDO- 0.844,2.844 1.344,3.052 0.5,0.208 10 false UDO+ 0.854,3.271 1.354,3.479 0.5,0.208 10 false UJSS 1.323,0.188 1.479,0.385 0.156,0.198 10 false 9 1.302,0.615 1.458,0.813 0.156,0.198 10 false 6 1.302,1.063 1.458,1.26 0.156,0.198 10 false 7 1.313,1.49 1.469,1.688 0.156,0.198 10 false 8 1.292,1.896 1.5,2.104 0.208,0.208 10 false 10 1.313,2.292 1.469,2.49 0.156,0.198 10 false 2 1.313,2.698 1.469,2.896 0.156,0.198 10 false 3 1.313,3.156 1.469,3.354 0.156,0.198 10 false 5 5.615,0.135 5.823,0.344 0.208,0.208 10 false 25 5.625,0.563 5.833,0.771 0.208,0.208 10 false 26 5.646,0.99 5.854,1.198 0.208,0.208 10 false 28 5.635,1.417 5.844,1.625 0.208,0.208 10 false 27 5.635,1.823 5.844,2.031 0.208,0.208 10 false 11 5.677,2.25 5.833,2.448 0.156,0.198 10 false 2 5.667,2.656 5.823,2.854 0.156,0.198 10 false 3 5.677,3.083 5.833,3.281 0.156,0.198 10 false 5

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the F47 and j3 radio receiver assembly connectors.


b.

Disconnect the j1 No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

E262654C07
1.25,0.083 1.667,0.333 0.417,0.25 3.469,0.063 3.802,0.302 0.333,0.24 5.76,0.073 6.094,0.313 0.333,0.24 1.729,1.177 2.333,0.917 true 2.01,1.313 2.333,1.417 true 1.917,1.323 2.083,1.583 true 1.823,1.323 1.75,1.583 true 1.719,1.323 1.333,1.583 true 3.792,1.208 4.25,1.167 true 3.167,1.333 3.583,1.25 true 3.75,1.333 4.167,1.583 true 6.198,1.344 6.5,1.25 true 6.063,1.385 6.333,1.667 true 5.917,1.417 5.792,1.625 true 5.75,1.396 5.333,1.5 true 5.615,1.323 5.333,1.167 true 5.813,1 5.417,0.833 true 6,1 6.5,0.75 true 5.948,1.094 6.5,1 true 2.417,0.802 3.031,1 0.615,0.198 10 false AGND 2.375,1.344 2.823,1.563 0.448,0.219 10 false VAL+ 1.948,1.583 2.448,1.781 0.5,0.198 10 false VA- 1.49,1.583 2.01,1.781 0.521,0.198 10 false VAR+ 1.042,1.583 1.51,1.781 0.469,0.198 10 false ADPG 1.302,0.115 1.854,0.375 0.552,0.26 10 false F47 3.552,0.104 3.885,0.271 0.333,0.167 10 false j3 2.802,1.302 3.198,1.51 0.396,0.208 10 false US1+ 4.25,1.5 4.708,1.719 0.458,0.219 10 false USG1 4.333,1.083 4.75,1.313 0.417,0.229 10 false US1- 5.365,1.583 5.865,1.781 0.5,0.198 10 false ASGN 4.99,1.031 5.333,1.229 0.344,0.198 10 false ARO 5.01,1.417 5.344,1.615 0.333,0.198 10 false ALO 6.417,1.583 6.917,1.781 0.5,0.198 10 false AUXO 6.583,1.135 7.083,1.333 0.5,0.198 10 false AGND 5.031,0.74 5.438,0.938 0.406,0.198 10 false UDO- 6.583,0.667 7.01,0.854 0.427,0.188 10 false UDO+ 6.583,0.885 7.031,1.073 0.448,0.188 10 false UJSS 0.438,0.083 0.833,0.292 0.396,0.208 10 false *a 2.792,0.052 3.188,0.26 0.396,0.208 10 false *a 4.854,0.083 5.25,0.292 0.396,0.208 10 false *b 5.854,0.115 6.24,0.323 0.385,0.208 10 false j1
*a Front view of wire harness connector
(to Radio Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Standard Resistance:
Tester Connection Condition Specified Condition
j1-9 (AUXO) - F47-25 (ADPG) Always Below 1 Ω
j1-6 (ARO) - F47-26 (VAR+) Always Below 1 Ω
j1-7 (ALO) - F47-28 (VAL+) Always Below 1 Ω
j1-8 (ASGN) - F47-27 (VA-) Always Below 1 Ω
j1-10 (AGND) - F47-11 (AGND) Always Below 1 Ω
j1-2 (UDO-) - j3-2 (US1-) Always Below 1 Ω
j1-3 (UDO+) - j3-3 (US1+) Always Below 1 Ω
j1-5 (UJSS) - j3-5 (USG1) Always Below 1 Ω
j1-9 (AUXO) - Body ground Always 10 kΩ or higher
j1-6 (ARO) - Body ground Always 10 kΩ or higher
j1-7 (ALO) - Body ground Always 10 kΩ or higher
j1-8 (ASGN) - Body ground Always 10 kΩ or higher
j1-10 (AGND) - Body ground Always 10 kΩ or higher
j1-2 (UDO-) - Body ground Always 10 kΩ or higher
j1-3 (UDO+) - Body ground Always 10 kΩ or higher
j1-5 (UJSS) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR