81590A
1.INSPECT REAR LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Rear Light Assembly LH) |
Apply battery voltage to the rear light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 2 (E) |
Taillight comes on |
If the result is not as specified, replace the rear combination light assembly LH.
Apply battery voltage to the rear light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E) |
Back-up light comes on |
If the result is not as specified, replace the rear combination light assembly LH.
81580D
2.INSPECT REAR LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Rear Light Assembly RH) |
Apply battery voltage to the rear light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 2 (E) |
Taillight comes on |
If the result is not as specified, replace the rear combination light assembly RH.
Apply battery voltage to the rear light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E) |
Back-up light comes on |
If the result is not as specified, replace the rear combination light assembly RH.