Check that the tire pressure and tire size are as specified.
Check that there is no excessive wear on the tires.
| Result | Proceed to |
|---|---|
| Tire size is as specified and there is no excessive wear | A |
| Tire size is not as specified but there is no excessive wear | |
| Tire size is as specified but there is excessive wear | B |
| Tire size is not as specified and there is excessive wear | |
| Tire size is totally different from specified size |
A
B
Check tire movement distance.
| *a | 5 Rotations | *b | Chalk Mark |
| *c | Movement Distance (A) | - | - |
On a level surface, center the steering wheel and stop the vehicle.
Apply chalk to a point on the tire and on the ground.
Drive the vehicle straight ahead, and stop the vehicle after the tire rotates 5 times.
Mark the vehicle stop position on the ground, and measure the movement distance (A). Check that the measured distance is within the standard range.
9565 to 9955 mm (31.37 to 32.65 ft.)
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Perform the front wheel alignment inspection.
For alignment inspection, follow the toe-in and camber specifications.
Click hereSuspension>ALIGNMENT / HANDLING DIAGNOSIS>FRONT WHEEL ALIGNMENT>ADJUSTMENT
Alignment is within specifications.
Perform the rear wheel alignment inspection.
For alignment inspection, follow the toe-in and camber specifications.
Click hereSuspension>ALIGNMENT / HANDLING DIAGNOSIS>REAR WHEEL ALIGNMENT>ADJUSTMENT
Alignment is within specifications.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
for Front Wheel
Click hereSuspension>ALIGNMENT / HANDLING DIAGNOSIS>FRONT WHEEL ALIGNMENT>ADJUSTMENT
for Rear Wheel
Click hereSuspension>ALIGNMENT / HANDLING DIAGNOSIS>REAR WHEEL ALIGNMENT>ADJUSTMENT