Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR
RM32H0E _58 Vehicle Interior _059841 HEATING / AIR CONDITIONING _0295313 COMPRESSOR G

HEATING / AIR CONDITIONING  COMPRESSOR  INSPECTION  


PROCEDURE

Hide 88310 1.INSPECT COMPRESSOR WITH PULLEY ASSEMBLY

a.
I114446C01
1.01,1.677 1.5,1.198 true 2.5,1.646 1.948,1.188 true 0.115,0.125 0.427,0.323 0.313,0.198 10 false *a 0.76,1.708 1.26,1.927 0.5,0.219 10 false SOL+ 2.406,1.688 2.906,1.906 0.5,0.219 10 false SOL-
*a Component without harness connected (Compressor with Pulley Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (SOL+) - 1 (SOL-) 20°C (68°F) 10.1 to 11.1 Ω


If the result is not as specified, replace the compressor with pulley assembly.