Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System with Side-mounted Air Conditioner Pressure Sensor) › 2016.10–2019.09
RM32H0E _58 Vehicle Interior _059841 HEATING / AIR CONDITIONING _0298708 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System with Side-mounted Air Conditioner Pressure Sensor) U

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System with Side-mounted Air Conditioner Pressure Sensor)  TERMINALS OF ECU  


AIR CONDITIONING AMPLIFIER ASSEMBLY


E334599N05
2.51,0.281 2.906,0.552 0.396,0.271 3.865,0.292 4.26,0.563 0.396,0.271 5.104,0.292 5.5,0.563 0.396,0.271 2.594,0.344 3.052,0.542 0.458,0.198 10 false F71 3.958,0.344 4.417,0.542 0.458,0.198 10 false F73 5.219,0.344 5.677,0.542 0.458,0.198 10 false m1

HINT:

Check from the rear of the connector while it is connected to the air conditioning amplifier assembly.


Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
F71-1 (SG-1) - Body ground LG - Body ground Ground for cooler (room temp. sensor) thermistor Always Below 1 V
F71-2 (SG-2) - Body ground G - Body ground Ground for air conditioner pressure sensor Always Below 1 V
F71-6 (S5-3) - F71-2 (SG-2) GR - G Power supply for air conditioner pressure sensor Ignition switch ON 4.75 to 5.25 V
Ignition switch off Below 1 V
F71-14 (TR) - F71-1 (SG-1) B - LG Cooler (room temp. sensor) thermistor signal
·

Ignition switch ON

·

Cabin temperature: 25°C (77°F)


1.8 to 2.2 V
·

Ignition switch ON

·

Cabin temperature: 40°C (104°F)


1.2 to 1.6 V
F71-24 (PRE) - F71-2 (SG-2) V - G Air conditioner pressure sensor signal
·

Engine running

·

Air conditioning system operating

·

Refrigerant pressure: Abnormal pressure (more than 3.025 MPaG (30.8 kgf/cm2, 439 psi)*2, more than 2.812 MPaG (28.7 kgf/cm2, 408 psi)*3)


4.61 V or higher
·

Engine running

·

Air conditioning system operating

·

Refrigerant pressure: Abnormal pressure (less than 0.176 MPaG (1.8 kgf/cm2, 26 psi)*2, less than 0.196 MPaG (2.0 kgf/cm2, 28 psi) or less*3)


Below 0.74 V
·

Engine running

·

Air conditioning system operating

·

Refrigerant pressure: Normal pressure (less than 3.025 MPaG (30.8 kgf/cm2, 439 psi) and more than 0.176 MPaG (1.8 kgf/cm2, 26 psi)*2, less than 2.812 MPaG (28.7 kgf/cm2, 408 psi) and more than 0.196 MPaG (2.0 kgf/cm2, 28 psi)*3)


0.74 to 4.61 V
F73-1 (B) - F73-4 (GND) V - W-B Power source (Back-up) Always 11 to 14 V
F73-2 (IG+) - F73-4 (GND) B - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
F73-3 (SOL+) - F73-4 (GND) B - W-B Compressor solenoid operation signal
·

Engine running

·

Blower switch: Lo

·

A/C switch: On


Pulse generation
(See waveform 1)
F73-4 (GND) - Body ground W-B - Body ground Ground for main power supply Always Below 1 V
F73-6 (BLW) - F73-4 (GND) Y - W-B Blower motor speed control signal
·

Ignition switch ON

·

Blower switch: Lo


Pulse generation
(See waveform 2)
F73-11 (CANH) - F73-12 (CANL) P - SB CAN communication signal CAN communication is performed Pulse generation
F73-14 (LIN1) - F73-4 (GND) BE - W-B LIN communication signal (Air conditioning control assembly) Ignition switch ON Pulse generation
(See waveform 3)
F73-7 (NANO) - F73-4 (GND)*1 R - W-B Ion generator sub-assembly operation signal
·

Ignition switch ON

·

Blower switch: Lo

·

"nanoe" switch: On


Below 1 V
·

Ignition switch ON

·

Blower switch: Lo

·

"nanoe" switch: off


11 to 14 V
F73-26 (NAIN) - F73-4 (GND)*1 W - W-B Ion generator sub-assembly operation condition signal
·

Ignition switch ON

·

Blower switch: Lo

·

"nanoe" switch: On


Below 1 V
·

Ignition switch ON

·

Blower switch: Lo

·

"nanoe" switch: off


4.75 to 5.25 V
m1-2 (BUS G) - Body ground B - Body ground Ground for BUS IC Always Below 1 V
m1-3 (BUS) - m1-2 (BUS G) L - B BUS IC control signal Ignition switch ON Pulse generation
(See waveform 4)
m1-4 (BUSB) - m1-2 (BUS G) R - B Power supply for BUS IC Always 11 to 14 V
m1-5 (SG-3) - Body ground GR - Body ground Ground for No. 1 cooler thermistor (evaporator temperature sensor) Always Below 1 V
m1-6 (TE) - m1-5 (SG-3) GR - GR No. 1 cooler thermistor (evaporator temperature sensor)
·

Ignition switch ON

·

Evaporator temperature: 0°C (32°F)


1.7 to 2.1 V
·

Ignition switch ON

·

Evaporator temperature: 15°C (59°F)


0.9 to 1.3 V

*1: w/ Ion Generator

*2: for HFC-134a (R134a)

*3: for HFO-1234yf (R1234yf)


a.
E106664E24
3,1.188 3.323,1.417 0.323,0.229 10 false GND

Waveform 1:

Item Content
Terminal No. (Symbol) F73-3 (SOL+) - F73-4 (GND)
Tool Setting 5 V/DIV., 500 μs/DIV.
Vehicle Condition
·

Engine running

·

Blower switch: Lo

·

A/C switch: on




b.
E338778N04
2.823,1.24 3.281,1.438 0.458,0.198 10 false GND

Waveform 2:

Item Content
Terminal No. F73-6 (BLW) - F73-4 (GND)
Tool Setting 2 V/DIV., 1 ms./DIV.
Vehicle Condition
·

Ignition switch ON

·

Blower switch: Lo




c.
E334619N07
0.313,1.563 0.771,1.76 0.458,0.198 10 false GND

Waveform 3:

Item Content
Terminal No. F73-14 (LIN1) - F73-4 (GND)
Tool Setting 2 V/DIV., 20 ms./DIV.
Vehicle Condition Ignition switch ON


d.
E202803N15
0.333,1.469 0.75,1.646 0.417,0.177 10 GND

Waveform 4:

Item Content
Terminal No. m1-3 (BUS) - m1-2 (BUS G)
Tool Setting 2 V/DIV., 2 ms./DIV.
Vehicle Condition Ignition switch ON



AIR CONDITIONING CONTROL ASSEMBLY


E352244N02
3.26,0.25 3.76,0.5 0.5,0.25 3.396,0.271 4.469,0.469 1.073,0.198 10 false F61

HINT:

Check from the rear of the connector while it is connected to the air conditioning control assembly.


Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
F61-16 (GND) - Body ground W-B - Body ground Ground for air conditioning control assembly Always Below 1 V
F61-2 (LIN1) - Body ground BE - Body ground LIN communication signal Ignition switch ON Pulse generation
(See waveform 1)
F61-10 (IG+) - F61-16 (GND) BE - W-B Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V

a.
E334619N07
0.313,1.563 0.771,1.76 0.458,0.198 10 false GND

Waveform 1:

Item Content
Terminal No. F61-2 (LIN1) - Body ground
Tool Setting 2 V/DIV., 20 ms./DIV.
Vehicle Condition Ignition switch ON