Home › General › SPECIFICATIONS › CLUTCH
RM32H0E _V1 General _059376 SPECIFICATIONS _0304072 CLUTCH F

SPECIFICATIONS  CLUTCH  TORQUE SPECIFICATIONS  


Clutch System (for EC69)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Clutch release bleeder sub-assembly x Bleeder plug 8.4 86 74

Clutch System (for EC6A)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Clutch release bleeder sub-assembly x Bleeder plug 8.4 86 74

Clutch Pedal (for LHD)
Part Tightened N*m kgf*cm ft.*lbf
Clutch pedal sub-assembly x Clutch pedal bracket sub-assembly x Clutch pedal support sub-assembly 36.8 375 27
Clutch pedal support assembly x Clutch master cylinder assembly 12.7 130 9
No. 4 instrument panel bracket x Clutch pedal support assembly 23.6 241 17

Clutch Pedal (for RHD)
Part Tightened N*m kgf*cm ft.*lbf
Clutch pedal sub-assembly x Clutch pedal support sub-assembly 36.8 375 27
Clutch pedal support assembly x Clutch master cylinder assembly 12.7 130 9
Clutch pedal support assembly x Body 12.7 130 9

Clutch Master Cylinder (for LHD)
Part Tightened N*m kgf*cm ft.*lbf
Clutch master cylinder assembly x Body 12.7 130 9
Clutch master cylinder to flexible hose tube x Clutch master cylinder assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10

Clutch Master Cylinder (for RHD)
Part Tightened N*m kgf*cm ft.*lbf
Clutch master cylinder assembly x Body 12.7 130 9
Clutch master cylinder to flexible hose tube x Clutch master cylinder assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10

Clutch Stroke Sensor (for LHD)
Part Tightened N*m kgf*cm in.*lbf
Clutch pedal stroke sensor assembly set nut 8.5 87 75

Clutch Stroke Sensor (for LHD)
Part Tightened N*m kgf*cm in.*lbf
Clutch pedal stroke sensor assembly set nut 8.5 87 75

Clutch Unit (for EC69)
Part Tightened N*m kgf*cm ft.*lbf
Clutch cover assembly x Flywheel sub-assembly 19.1 195 14
Clutch release cylinder with bearing assembly x Manual transaxle assembly 22.5 229 17
Bleeder clutch release tube x Clutch release cylinder with bearing assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release bleeder sub-assembly x Manual transaxle assembly 16.7 170 12
Bleeder clutch release tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release cylinder to flexible hose tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release cylinder to flexible hose tube x Manual transaxle assembly 11.8 120 9

Clutch Unit (for EC6A)
Part Tightened N*m kgf*cm ft.*lbf
Clutch cover assembly x Flywheel sub-assembly 19.1 195 14
Clutch release cylinder with bearing assembly x Manual transaxle assembly 22.5 229 17
Bleeder clutch release tube x Clutch release cylinder with bearing assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release bleeder sub-assembly x Manual transaxle assembly 16.7 170 12
Bleeder clutch release tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release cylinder to flexible hose tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clutch release cylinder to flexible hose tube x Manual transaxle assembly 11.8 120 9

Clutch Pedal Switch
Part Tightened N*m kgf*cm ft.*lbf
Clutch start switch assembly x Clutch pedal support sub-assembly 15.7 160 12