RM32H0E
_V1
General
_059376
SPECIFICATIONS
_0304072
CLUTCH
F
SPECIFICATIONS CLUTCH SERVICE DATA
Clutch Pedal (for LHD)
| Pedal height from clip
|
-
|
179.5 to 193.5 mm (7.07 to 7.62 in.)
|
| Pedal free play
|
-
|
4.2 to 10.6 mm (0.165 to 0.417 in.)
|
| Clutch release point from pedal full stroke end position
|
-
|
25 mm (0.984 in.) or more
|
| Pedal stroke (Reference)
|
-
|
137.3 to 142.3 mm (5.41 to 5.60 in.)
|
Clutch Pedal (for RHD)
| Pedal height from floor panel
|
-
|
177.8 to 191.8 mm (7.00 to 7.55 in.)
|
| Pedal free play
|
-
|
4.2 to 10.6 mm (0.165 to 0.417 in.)
|
| Clutch release point from pedal full stroke end position
|
-
|
25 mm (0.984 in.) or more
|
| Pedal stroke (Reference)
|
-
|
137.5 to 142.5 mm (5.41 to 5.61 in.)
|
Clutch Stroke Sensor (for LHD)
| Standard Voltage
|
Clutch Stroke Sensor Voltage
|
Clutch pedal fully released
|
0.8 to 1.2 V
|
| Clutch pedal fully depressed
|
2.6 to 4.5 V
|
Clutch Stroke Sensor (for RHD)
| Standard Voltage
|
Clutch Stroke Sensor Voltage
|
Clutch pedal fully released
|
0.8 to 1.2 V
|
| Clutch pedal fully depressed
|
2.6 to 4.5 V
|
Clutch Unit (for EC69)
| Clutch disc rivet depth
|
Minimum
|
0.3 mm (0.0118 in.)
|
| Clutch disc runout
|
Maximum
|
0.8 mm (0.0315 in.)
|
| Clutch cover diaphragm spring wear
|
Maximum depth
|
0.5 mm (0.0197 in.)
|
| Maximum width
|
6.0 mm (0.236 in.)
|
| Flywheel runout
|
Maximum
|
0.1 mm (0.00394 in.)
|
| Clutch cover diaphragm spring tip non-alignment
|
Maximum
|
0.5 mm (0.0197 in.)
|
Clutch Unit (for EC6A)
| Clutch disc rivet depth
|
Minimum
|
0.3 mm (0.0118 in.)
|
| Clutch disc runout
|
Maximum
|
0.8 mm (0.0315 in.)
|
| Clutch cover diaphragm spring wear
|
Maximum depth
|
0.5 mm (0.0197 in.)
|
| Maximum width
|
6.0 mm (0.236 in.)
|
| Flywheel runout
|
Maximum
|
0.1 mm (0.00394 in.)
|
| Clutch cover diaphragm spring tip non-alignment
|
Maximum
|
0.5 mm (0.0197 in.)
|
Clutch Pedal Switch
| Clutch start switch assembly resistance
|
| 1 - 2
|
On (Pushed in)
|
Below 1 Ω
|
| Off (Released)
|
10 kΩ or higher
|
Brake Fluid
| -
|
SAE J1703 or FMVSS No. 116 DOT3
|
| -
|
SAE J1704 or FMVSS No. 116 DOT4
|