Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS
RM32H0E _V1 General _059376 SPECIFICATIONS _0304695 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


VSC OFF Switch (for LHD)
Tester Connection Condition Specified Condition
13 (+) - 8 (E) Switch pushed Below 1 Ω
13 (+) - 8 (E) Switch not pushed 10 kΩ or higher

VSC OFF Switch (for RHD)
Tester Connection Condition Specified Condition
11 (+) - 8 (E) Switch pushed Below 1 Ω
11 (+) - 8 (E) Switch not pushed 10 kΩ or higher

Brake Hold Switch
Tester Connection Condition Specified Condition
12 (+B) - 8 (E) Switch pushed Below 1 Ω
12 (+B) - 8 (E) Switch not pushed 10 kΩ or higher