Home › General › SPECIFICATIONS › PARKING BRAKE
RM32H0E _V1 General _059376 SPECIFICATIONS _0304698 PARKING BRAKE F

SPECIFICATIONS  PARKING BRAKE  SERVICE DATA  


Parking Brake Actuator Assembly LH:
Tester Connection Parking Brake Actuator Operation
Battery positive (+) -2 (MRL+)
Battery negative (-) -1 (MRL-)
Lock
Battery positive (+) -1 (MRL-)
Battery negative (-) -2 (MRL+)
Release


Parking Brake Actuator Assembly RH:
Tester Connection Parking Brake Actuator Operation
Battery positive (+) -2 (MRR+)
Battery negative (-) -1 (MRR-)
Lock
Battery positive (+) -1 (MRR-)
Battery negative (-) -2 (MRR+)
Release


Electric Parking Brake Switch:
Tester Connection Condition Specified Condition
6 (SWI1) - 5 (SW01) OFF (Release) 10 kΩ or higher
ON (Lock) Below 1 Ω
Switch not operated 10 kΩ or higher
6 (SWI1) - 4 (SWI2) OFF (Release) Below 1 Ω
ON (Lock) Below 1 Ω
Switch not operated 10 kΩ or higher
6 (SWI1) - 3 (SW02) OFF (Release) Below 1 Ω
ON (Lock) 10 kΩ or higher
Switch not operated Below 1 Ω
4 (SWI2) - 5 (SW01) OFF (Release) 10 kΩ or higher
ON (Lock) Below 1 Ω
Switch not operated Below 1 Ω
4 (SWI2) - 3 (SW02) OFF (Release) Below 1 Ω
ON (Lock) 10 kΩ or higher
Switch not operated 10 kΩ or higher