Home › General › MAINTENANCE › REAR BRAKE FLEXIBLE HOSE
RM32H0E _V1 General _059503 MAINTENANCE _0304826 REAR BRAKE FLEXIBLE HOSE A

MAINTENANCE  REAR BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.PERFORM REAR BRAKE PAD REPLACEMENT MODE

Hide 2.REMOVE REAR WHEEL

Hide 3.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47319F 4.REMOVE REAR FLEXIBLE HOSE

a.
C366022

Remove the union bolt and gasket, and disconnect the rear flexible hose from the rear disc brake cylinder assembly.


b.
C366026

Remove the bolt and separate the rear flexible hose from the flexible hose bracket.


c.

Using a union nut wrench, disconnect the brake tube while holding the rear flexible hose with a wrench.

NOTICE:
·

Do not kink or damage the brake tube.

·

Do not allow any foreign matter such as dirt or dust to enter the brake tube from the connecting parts.




d.

Remove the clip and rear flexible hose from the vehicle body.