Home › General › MAINTENANCE › BACK-UP LIGHT BULB
RM32H0E _V1 General _059503 MAINTENANCE _0304913 BACK-UP LIGHT BULB A

MAINTENANCE  BACK-UP LIGHT BULB  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE BACK DOOR SERVICE HOLE COVER LH

a.
E352420C01
1.958,0.969 2.313,0.573 true 2.354,0.458 2.552,0.635 0.198,0.177 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Using a screw driver with its tip wrapped in protective tape, disengage the claws to remove the back door service hole cover LH as shown in the illustration.


Hide 2.REMOVE BACK UP LIGHT BULB

a.
E352421C01
0,0 0,0 false
V113147

Remove in this Direction


Turn the back up light socket and wire with the back up light bulb as shown in the illustration to disconnect them as a unit.


b.
E352422C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the back up light bulb from the back up light socket and wire as shown in the illustration.