Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 1) › from 2018.05
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0358465 AIR FUEL RATIO SENSOR(for Sensor 1) G

8NR-FTS ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 1)  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A332545C02
1.958,0.802 2.125,0.385 2.125,0.385 2.292,0.385 true 1.458,1.458 1.292,1.875 1.292,1.875 1.125,1.875 true 1.469,0.802 1.302,0.385 1.302,0.385 1.135,0.385 true 0.094,0.083 0.406,0.281 0.313,0.198 10 false *a 0.917,0.302 1.229,0.5 0.313,0.198 10 false +B 2.344,0.302 2.833,0.49 0.49,0.188 10 false HA1A 0.76,1.771 1.25,1.958 0.49,0.188 10 false A1A-
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.