Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 2) › from 2018.05
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0358466 AIR FUEL RATIO SENSOR(for Sensor 2) G

8NR-FTS ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 2)  INSPECTION  


PROCEDURE

Hide 89467C 1.INSPECT AIR FUEL RATIO SENSOR

a.
A401882C04
1,0.5 1.167,0.5 1.167,0.5 1.417,0.917 true 1,1.833 1.167,1.833 1.167,1.833 1.417,1.417 true 2.083,0.917 2.333,0.5 2.333,0.5 2.5,0.5 true 0.073,0.083 0.469,0.333 0.396,0.25 10 false *a 0.771,0.427 1.167,0.677 0.396,0.25 10 false +B 0.635,1.76 1.208,2.01 0.573,0.25 10 false A1B- 2.563,0.427 3.063,0.667 0.5,0.24 10 false HA1B
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1B) - 2 (+B) 20°C (68°F) 2 to 6 Ω
1 (HA1B) - 4 (A1B-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.