Home › Engine / Hybrid System › 8NR-FTS (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2018.05
RM32H0E _51 Engine / Hybrid System _060038 8NR-FTS EMISSION CONTROL _0359845 DIFFERENTIAL PRESSURE SENSOR A

8NR-FTS EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 89481B 1.REMOVE DIFFERENTIAL PRESSURE SENSOR

a.
A426789

Disconnect the differential pressure sensor connector.


b.

Slide the clip and disconnect the vacuum transmitting hose from the differential pressure sensor.


c.

Remove the bolt and differential pressure sensor from the inlet No. 1 air duct sub-assembly.