| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Disc brake cylinder bleeder plug | Front | 7.5 | 76 | 66 | |||
| Rear
(for TMC Made) |
8.3 | 85 | 73 | ||||
| Rear
(for TMMT Made) |
11 | 112 | 8 | ||||
| Brake tube flare nut (M10) | Specified tightening torque | 15.2 | 155 | 11 | |||
| For use with a union nut wrench | 13.4 | 137 | 10 | ||||
| Brake tube flare nut (M12) | Specified tightening torque | 19.5 | 199 | 14 | |||
| For use with a union nut wrench | 17.4 | 177 | 13 | ||||
| Clevis lock nut | 22 | 224 | 16 | ||||
| Brake pedal support assembly x Brake booster assembly | 12.7 | 130 | 9 | ||||
| Brake pedal support assembly x Instrument panel reinforcement assembly | 23.6 | 241 | 17 | ||||
| Brake master cylinder reservoir assembly set screw | 4.0 | 41 | 35 | ||||
| Brake master cylinder sub-assembly x Brake booster assembly | 20 | 204 | 15 | ||||
| Dash panel heat insulator x Vehicle body | 5.0 | 51 | 44 | ||||
| Suction pipe sub-assembly x Vehicle body x Engine mounting sub-assembly | 5.4 | 55 | 48 | ||||
| Vacuum hose assembly x Vehicle body | 5.4 | 55 | 48 | ||||
| Vacuum pump housing x End cover | 7.5 | 76 | 66 | ||||
| Vacuum pump assembly set bolt | 21 | 214 | 15 | ||||