Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2019.09
RM32H0E _56 Audio / Visual / Telematics _060815 NAVIGATION / MULTI INFO DISPLAY _0299845 NAVIGATION SYSTEM D

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  SYSTEM DESCRIPTION  


NAVIGATION SYSTEM OUTLINE


a.

Vehicle position tracking methods

It is essential that the navigation system correctly tracks the current vehicle position and displays it on the map. There are 2 methods to track the current vehicle position: autonomous (dead reckoning) and GPS* (satellite) navigation. Both navigation methods are used in conjunction with each other.

*: GPS (Global Positioning System)

E228050E16
5.833,2.229 6.51,2.229 6.51,2.229 6.51,3.375 false 4.99,1.844 5.844,1.844 5.844,1.844 5.844,3.427 false 5.844,3.427 2.781,3.427 2.781,3.427 2.781,3.031 false 0.219,0.354 1.24,0.563 1.021,0.208 10 false GPS Satellite 6.125,3.375 6.979,3.927 0.854,0.552 10 false Location by Autonomous Navigation 3.625,1.146 4.813,1.375 1.188,0.229 10 false Navigation System 3.802,1.708 4.771,1.917 0.969,0.208 10 false Gyro Sensor 4.073,2.385 4.458,2.594 0.385,0.208 10 false ECU 1.844,1.813 3.094,2.208 1.25,0.396 10 false Navigation Antenna Assembly 1.76,2.552 3.188,2.76 1.427,0.208 10 false Vehicle Speed Signal 0.094,1.875 1.208,2.24 1.115,0.365 10 false Location by GPS Navigation 0.219,5.26 1.573,5.458 1.354,0.198 10 false Navigation Antenna 0.365,4.542 1.469,4.906 1.104,0.365 10 false Receive Satellite Signals 0.208,6.635 1.635,6.844 1.427,0.208 10 false Vehicle Speed Signal 0.188,5.875 1.542,6.302 1.354,0.427 10 false Detect Vehicle Driving Distance 2.906,3.813 4.083,4.156 1.177,0.344 10 false Navigation ECU 2.146,4.625 3.177,4.948 1.031,0.323 10 false Current Position Calculation 4.063,4.698 5.125,4.917 1.063,0.219 10 false GPS Correction 3.865,5.813 5.375,6.177 1.51,0.365 10 false Create Current Vehicle Position Tracking Data 2.083,6.594 3.333,6.958 1.25,0.365 10 false Direction Change Detection 2.24,7.344 3.229,7.552 0.99,0.208 10 false Gyro Sensor 2.198,7.833 3.313,8.198 1.115,0.365 10 false Map Matching Correction 3.75,7.802 5.365,8.177 1.615,0.375 10 false Map and Current Vehicle Position Data Processing 5.844,6.198 6.979,6.958 1.135,0.76 10 false Radio and Display Receiver Assembly 5.875,7.917 7.052,8.146 1.177,0.229 10 false Navigation Screen 2.333,8.854 2.99,9.063 0.656,0.208 10 false Map Data 3.927,8.792 4.844,8.979 0.917,0.188 10 false Map Scrolling 3.927,9.125 5.281,9.323 1.354,0.198 10 false Map Scale Switching

Operation Description
Vehicle Position Calculation The navigation ECU calculates the current vehicle position (direction and current position) using the direction deviation signal from the gyro sensor and driving distance signal calculated from the vehicle speed signal and creates the driving route.
Map Display Processing The navigation ECU processes the vehicle position data, vehicle driving track and map data from the internal memory.
Map Matching The map data from the internal memory is compared to the vehicle position and driving track data. Then, the vehicle position is matched with the nearest road.
GPS Correction The vehicle position is matched to the position measured by the GPS. Then, the GPS measurement position data is compared with the vehicle position and driving track data. If the position is very different, the GPS measurement position is used.
Distance Correction The vehicle speed signal includes errors caused by tire wear and slippage between the tires and road surface. Distance correction is performed to account for this. The navigation ECU automatically offsets the signal to make up for the difference between it and the distance data of the map. The offset is automatically updated.

E228757E52
0.156,0.521 2.469,0.969 2.313,0.448 10 false Navigation functions even where GPS signals do not reach. 2.708,3.344 4.354,3.552 1.646,0.208 10 false Autonomous Navigation 4.458,3.781 6.198,4.51 1.74,0.729 10 false Autonomous Navigation and GPS Signal Navigation 5.813,1.438 6.719,1.656 0.906,0.219 10 false GPS Satellite 0.271,1.427 1.271,1.635 1,0.208 10 false - In a tunnel 0.271,1.802 1.958,1.99 1.688,0.188 10 false - In an indoor parking lot 0.271,2.177 1.938,2.406 1.667,0.229 10 false - Between tall buildings 0.271,2.573 1.688,2.792 1.417,0.219 10 false - Under an overpass 0.271,2.969 2.552,3.177 2.281,0.208 10 false - In a forest or on a tree-lined path

HINT:

The combination of autonomous and GPS navigation makes it possible to display the vehicle position even when the vehicle is in places where GPS signals cannot be received. When only autonomous navigation is used, however, the mapping accuracy may slightly decrease.



b.

Autonomous navigation

This method determines the relative vehicle position based on the driving track determined by the gyro sensor located in the navigation ECU and the vehicle speed signal.

i.

Gyro sensor

Used to calculate the direction by detecting angular velocity. It is located in the navigation ECU.


ii.

Vehicle speed signal

Used to calculate the vehicle driving distance.



c.

GPS* navigation (Satellite navigation)

This method detects the absolute vehicle position using radio waves from GPS satellites.

*: GPS satellites were launched by the U.S. Department of Defense for military purposes.

E228758E17
0.485,0.491 6.397,0.702 5.912,0.211 10 Current longitude/latitude/altitude is determined using the signal arrival time from four satellites. 4.909,3.095 5.319,3.31 0.41,0.215 10 GPS

Number of Satellites Measurement Description
2 or less Measurement is impossible Vehicle position cannot be obtained because the number of satellites is not enough.
3 2-dimensional measurement is possible Vehicle position is obtained based on the current longitude and latitude. (This is less precise than 3-dimensional measurement.)
4 3-dimensional measurement is possible Vehicle position is obtained based on the current longitude, latitude and altitude.


d.

Map matching

The current driving route is calculated by autonomous navigation (according to the gyro sensor and vehicle speed signal) and GPS navigation. This information is then compared with possible road shapes from the map data in the internal memory and the vehicle position is set onto the most appropriate road.

E228759E54
1.854,1.771 2.25,0.188 2.25,0.188 2.406,0.188 false 2.333,1.74 2.875,0.448 2.875,0.448 3.01,0.448 false 2.771,1.906 3.385,0.74 3.385,0.74 3.521,0.74 false 1.479,3.135 1.604,3.323 0.125,0.188 10 false A 0.51,0.531 0.927,0.729 0.417,0.198 10 false Start 1.385,4.104 1.99,4.771 0.604,0.667 10 false Map Matching 5.135,1.167 6.448,1.365 1.313,0.198 10 false Actual driving route 5.115,1.427 6.854,1.813 1.74,0.385 10 false Driving route on the display (Route by estimation) 5.625,2.031 6.104,2.25 0.479,0.219 10 false Roads 3.865,2.031 4.083,2.25 0.219,0.219 10 false L1 3.583,2.563 6.802,3.542 3.219,0.979 10 false The system compares the shape of roads L1, L2 and L3 to the estimated driving track after the vehicle makes a right turn. At point A, the vehicle position differs enough from the shape of L1 that the display switches to road L2. 3.052,0.365 3.24,0.51 0.188,0.146 10 false L2 2.458,0.115 2.656,0.26 0.198,0.146 10 false L1 3.583,0.656 3.792,0.802 0.208,0.146 10 false L3 4.354,2.031 4.573,2.25 0.219,0.219 10 false L2 4.844,2.031 5.063,2.25 0.219,0.219 10 false L3



USB AUDIO SYSTEM FUNCTION OUTLINE


a.

The No. 1 stereo jack adapter assembly is equipped with a USB connector. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, it is also possible to play MP3, WMA or AAC music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.

HINT:

Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.



b.

USB audio system compatible devices

i.

USB device

The following device formats can be used:

Compatible USB device formats
·

USB communication format: USB 2.0 HS (480 Mbps)

·

File format: FAT16/32 (Windows)

·

Class: Mass storage class



MP3, WMA and AAC files written to a USB device with any format other than those listed above may not be played correctly and their names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows:

·

Maximum directory hierarchy: 8 levels

·

Maximum number of folders in device: 3000 (including the root folder)

·

Maximum number of files in device: 9999

·

Maximum number of files per folder: 255



ii.

"iPod"

1.

for Panasonic Made:

"iPhone", "iPod", "iPod nano" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

The following "iPod nano", "iPod touch" and "iPhone" devices can be used with this system.

Made for:

-

"iPhone X"

-

"iPhone 8 Plus"

-

"iPhone 8"

-

"iPhone 7 Plus"

-

"iPhone 7"

-

"iPhone SE"

-

"iPhone 6s"

-

"iPhone 6s plus"

-

"iPhone 6"

-

"iPhone 6 plus"

-

"iPhone 5s"

-

"iPhone 5c"

-

"iPhone 5"

-

"iPhone 4s"

-

"iPod touch" (6th generation)

-

"iPod touch" (5th generation)

-

"iPod nano" (7th generation)


2.

for Pioneer Made:

"iPhone" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

The following "iPod touch" and "iPhone" devices can be used with this system.

Made for:

-

"iPhone X"

-

"iPhone 8 Plus"

-

"iPhone 8"

-

"iPhone 7 Plus"

-

"iPhone 7"

-

"iPhone SE"

-

"iPhone 6s"

-

"iPhone 6s plus"

-

"iPhone 6"

-

"iPhone 6 plus"

-

"iPhone 5s"

-

"iPhone 5c"

-

"iPhone 5"

-

"iPod touch" (6th generation)

-

"iPod touch" (5th generation)



HINT:
·

Depending on differences between models or software versions etc., some models might be incompatible with this system.

·

"iPod video" is not supported.






USB VIDEO SYSTEM FUNCTION OUTLINE


a.

Playable video file standards

File format MPEG-4, AVI Container, Windows Media Video
Corresponding screen size MAX 1920 x 1080
Corresponding frame rate MAX 60i/30p



HIGH-RESOLUTION SOUND SOURCE OUTLINE


a.

This device supports high-resolution sound sources.


b.

The definition of high-resolution is based on the standards of groups such as the CTA (Consumer Technology Association).


c.

The following formats and media can be used:

Supported formats WAV (LPCM), FLAC, ALAC, OGG Vorbis
Playable media USB



FILE INFORMATION OUTLINE


a.

Playable MP3 file standards

Compatible standard MPEG1 LAYER3, MPEG2 LSF LAYER3
Compatible sampling frequency
·

MPEG1 LAYER3: 32, 44.1, 48 (kHz)

·

MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)


Compatible bit rate
·

MPEG1 LAYER3: 32 to 320 (kbps)

·

MPEG2 LSF LAYER3: 8 to 160 (kbps)

·

Compatible with VBR


Compatible channel mode Stereo, joint stereo, dual channel, monaural


b.

Playable WMA file standards

Compatible standard WMA Ver. 7, 8, and 9
Compatible sampling frequency 32, 44.1, 48 (kHz)
Compatible bit rate (Only compatible with 2-channel playback)
·

Ver. 7, 8: CBR48 to 192 (kbps)

·

Ver. 9: CBR48 to 320 (kbps)

·

Compatible with VBR




c.

Playable AAC file standards

Compatible standard MPEG4/AAC-LC
Compatible sampling frequency 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate
·

8 to 320 (kbps)

·

Compatible with VBR




d.

Playable WAV (LPCM) file standards*

*: Files with a sample rate higher than 48kHz are down-converted to 48kHz/24bit.

Compatible sampling frequency 8/11.025/12/16/22.05/24/32/44.1/48/88.2/96/176.4/192 (kHz)
Compatible bit rate 16/24 (bit)


e.

Playable FLAC file standards*

*: Files with a sample rate higher than 48kHz are down-converted to 48kHz/24bit.

Compatible sampling frequency 8/11.025/12/16/22.05/24/32/44.1/48/88.2/96/176.4/192 (kHz)
Compatible bit rate 16/24 (bit)


f.

Playable ALAC file standards*

*: Files with a sample rate higher than 48kHz are down-converted to 48kHz/24bit.

Compatible sampling frequency 8/11.025/12/16/22.05/24/32/44.1/48/64/88.2/96 (kHz)
Compatible bit rate 16/24 (bit)


g.

Playable OGG Vorbis file standards*

*: Files with a sample rate higher than 48kHz are down-converted to 48kHz/24bit.

Compatible sampling frequency 8/11.025/16/22.05/32/44.1/48 (kHz)
Compatible bit rate
·

32-500 (kbps)

·

Compatible with VBR




h.

ID3 tag, WMA tag, AAC tag, TAG and Vorbis comment

i.

Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.

HINT:

This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3.)



ii.

Additional text information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.


iii.

Additional text information called an AAC tag can be input to AAC files. Information such as song titles and artist names can be stored.


iv.

Additional text information called a TAG can be input to WAV (LPCM), FLAC, ALAC files. Information such as song titles and artist names can be stored.


v.

Additional text information called a Vorbis comment can be input to OGG Vorbis files. Information such as song titles and artist names can be stored.



i.

Usable media

i.

USB devices can be used to play MP3/WMA/AAC/WAV (LPCM)/FLAC/ALAC/OGG Vorbis files.



j.

Usable media format

i.

Standards and restrictions

Maximum directory levels 8 levels
Maximum number of characters for a folder name/file name 32 characters
Maximum number of folders 192 (Including empty folders, root folders, and folders that do not contain MP3/WMA/AAC files)
Maximum number of files in a disc 255 (Including non-MP3/WMA/AAC files)



k.

File names

i.

Only files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac",".ogg",".3gp",".aac",".fla",".ogx" and ".oga" can be recognized and played as MP3, WMA, AAC, WAV (LPCM), FLAC, ALAC or OGG Vorbis files.


ii.

Save MP3, WMA, AAC, WAV (LPCM), FLAC, ALAC or OGG Vorbis files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac",".ogg",".3gp",".aac",".fla",".ogx" and ".oga".

NOTICE:

If non-MP3, non-WMA, non-AAC, non-WAV (LPCM), non-FLAC, non-ALAC or non-OGG Vorbis files are saved with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac",".ogg",".3gp",".aac",".fla",".ogx" and ".oga", those files may be wrongly recognized as MP3, WMA, AAC, WAV (LPCM), FLAC, ALAC or OGG Vorbis files and played. A loud noise may occur and damage to the speakers may result.





"Bluetooth" OUTLINE


E215384C07
2.406,0.865 2.594,1.031 0.188,0.167 10 *b 3.583,1.896 3.771,2.063 0.188,0.167 10 *c 4.573,1.948 4.969,2.26 0.396,0.313 10 *1 5.563,1.896 5.75,2.063 0.188,0.167 10 *d 4.021,1.385 4.208,1.552 0.188,0.167 10 *e 5.125,1.385 5.313,1.552 0.188,0.167 10 *e 0.073,0.052 0.26,0.219 0.188,0.167 10 *a
*1 Radio and Display Receiver Assembly
(Built-in "Bluetooth" Antenna)
- -
*a Example *b Cellular Network
*c Cellular Phone
("Bluetooth" Compatible Type)
*d Portable Audio Player
("Bluetooth" Compatible Type)
*e "Bluetooth" Wireless Connection - -


a.

"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.


b.

"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.

HINT:

The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.



c.

Hands-free function

i.

The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.

*: Some versions of "Bluetooth" compatible cellular phones may not function properly.



ii.

The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.


iii.

Compatible hands-free devices

Required "Bluetooth" specifications Ver. 2.0 or higher (Ver. 4.2+EDR recommended)
Compatible profiles
·

HFP (Hands-Free Profile) Ver. 1.0 or higher (Ver. 1.7 or higher recommended)*1

·

PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)*4

·

MAP (Message Access Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)*2

·

PAN (Personal Area Networking) Ver. 1.0 or higher*3

·

OPP (Object Push Profile) Ver.1.1 or higher (Ver. 1.2 or higher recommended)*4

·

SPP (Serial Port Profile) Ver. 1.2 or higher*5


Maximum number of hands-free devices that can be registered (including audio devices) 5

*1: This profile is necessary when using the hands-free function.

*2: This profile is necessary when using the message function (w/ SMS/MMS/e-mail Function).

*3: This profile is necessary when using the connected services function (w/ Connected Services).

*4: This profile is necessary when transferring the phonebook data.

*5: This profile is necessary when using the application link function (w/ Application Link Function).


HINT:

The amount of remaining battery charge displayed on the radio and display receiver assembly may be different from that of the "Bluetooth" device.




d.

"Bluetooth" audio function

i.

The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio and display receiver assembly.

*: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the radio and display receiver assembly may be limited.



ii.

Compatible "Bluetooth" audio devices

Required "Bluetooth" specifications Ver. 2.0 or higher (Ver. 4.2+EDR recommended)
Compatible profiles
·

A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended)

·

AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended)


Maximum number of audio devices that can be registered (including hands-free devices) 5

HINT:

The amount of remaining battery charge displayed on the radio and display receiver assembly may be different from that of the "Bluetooth" device.





RADIO DESCRIPTION


a.

Radio frequency band

i.

Radio broadcasts use the radio frequency bands shown in the table below.

E177192E08
0.677,0.25 1.469,0.458 0.792,0.208 10 Frequency 1.875,0.25 2.417,0.417 0.542,0.167 10 30 kHz 5.25,0.25 5.833,0.417 0.583,0.167 10 30 MHz 4.125,0.25 4.677,0.417 0.552,0.167 10 3 MHz 2.979,0.25 3.635,0.417 0.656,0.167 10 300 kHz 6.365,0.25 6.979,0.417 0.615,0.167 10 300 MHz 0.667,0.833 1.458,1.042 0.792,0.208 10 Designation 0.667,1.313 1.448,1.521 0.781,0.208 10 Radio wave 0.667,1.792 1.458,2 0.792,0.208 10 Modulation 2.583,0.833 2.813,1.01 0.229,0.177 10 LF 3.688,0.833 3.917,1.01 0.229,0.177 10 MF 4.854,0.833 5.083,1.01 0.229,0.177 10 HF 5.896,0.833 6.219,1.01 0.323,0.177 10 VHF 3.49,1.313 3.948,1.5 0.458,0.188 10 AM 5.75,1.313 5.979,1.49 0.229,0.177 10 FM 5.552,1.75 6.99,2 1.438,0.25 10 Frequency modulation 3.083,1.75 4.521,2.063 1.438,0.313 10 Amplitude modulation 0.344,2.292 1.594,2.5 1.25,0.208 10 LF: Low Frequency 5.26,2.292 6.979,2.5 1.719,0.208 10 VHF: Very High Frequency 3.74,2.292 5.063,2.5 1.323,0.208 10 HF: High Frequency 1.865,2.292 3.5,2.5 1.635,0.208 10 MF: Medium Frequency



b.

Service area

i.
E177193C06
0.938,2.073 1.104,2.229 0.167,0.156 10 *a 1.771,3.073 1.938,3.229 0.167,0.156 10 *c 1.354,2.563 1.521,2.719 0.167,0.156 10 *b
*a FM (Stereo)
*b FM (Monaural)
*c AM


The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.



c.

Radio reception problems

HINT:

In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


i.
E177194C06
2.375,0.385 2.958,0.708 2.958,0.708 2.958,0.896 false 0.125,0.094 0.333,0.26 0.208,0.167 10 *a 2.896,0.938 3.104,1.104 0.208,0.167 10 *b
*a Phasing
*b Ionosphere


Phasing

AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.


ii.
E177195C06
0.103,0.084 0.298,0.237 0.194,0.153 10 *a
*a Multipath


Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.


iii.
E177196C05
0.112,0.045 0.282,0.229 0.17,0.184 10 *a
*a Fade Out


Fade out

Fade out is caused by objects (buildings, mountains and other large obstructions) that deflect part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to be deflected.



d.

Noise problem

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

Radio Frequency Noise Occurrence Condition Presumable Cause
AM Noise occurs in a specific area Foreign noise
Noise occurs when listening to an intermittent broadcast An identical program transmitted from multiple towers can cause noise where the signals overlap
Noise occurs only at night Signal phasing
FM Noise occurs while driving in a specific area Multipath resulting from a change in FM frequency



VEHICLE CUSTOMIZATION OUTLINE


a.

Customization of functions can also be customized on the multi-display screen. Refer to Owner's Manual for further information on customizable items for the audio and visual system.

HINT:
·

Items available for customization via the audio and visual system can also be customized by using the GTS.

·

Some customize parameters displayed on the GTS will be displayed on the vehicle customization screen for the audio and visual system. Users can customize these items.





DAB (DIGITAL AUDIO BROADCAST) FUNCTION OUTLINE (w/ DAB Function)


a.

DAB (Digital Audio Broadcast) is the standard for digital radio. Compared to conventional FM/AM broadcasting, DAB enables higher sound quality radio broadcasting with lower noise when reception conditions change. DAB has an FM-Link function that automatically and temporarily changes the radio to the simultaneously broadcasted FM station if the DAB broadcasting reception level falls.



AUTOMATIC SOUND LEVELIZER (ASL) FUNCTION OUTLINE


a.

The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases). The ASL adjusts the volume level based upon vehicle speed signals sent from the combination meter assembly.



COMMUNICATION SYSTEM


a.

CAN Communication Outline

i.

The audio and visual system uses CAN communication between the radio and display receiver assembly and ECUs.



b.

AVC-LAN Outline (for 9 Speakers)

E323017C07
0.135,0.115 0.448,0.313 0.313,0.198 10 false *a 3.469,1.427 3.781,1.625 0.313,0.198 10 false *b 1.677,2.125 1.99,2.323 0.313,0.198 10 false *c 5.271,2.125 5.583,2.323 0.313,0.198 10 false *d
*a Example *b AVC-LAN Communication Line
*c Master Unit *d Slave Unit


i.

Components of the audio and visual system communicate with each other via AVC-LAN communication.


ii.

The AVC-LAN uses a twisted pair of wires for its communication lines.


iii.

The master unit of the AVC-LAN is the radio and display receiver assembly.

HINT:
·

The radio and display receiver assembly has the resistance (60 to 80 Ω) necessary for communication.

·

If a short or open occurs in the AVC-LAN circuit, communication is interrupted and the system will not operate normally.





c.

Local Bus Communication Outline

E323019C06
0.135,0.125 0.448,0.323 0.313,0.198 10 false *a 3.479,1.438 3.792,1.635 0.313,0.198 10 false *b 1.688,2.104 2,2.302 0.313,0.198 10 false *c 5.271,2.104 5.583,2.302 0.313,0.198 10 false *d
*a Example *b Local Bus Communication Line
*c Master Unit *d Slave Unit


i.

Components of the audio and visual system communicate with each other via the local bus.


ii.

The local bus uses a twisted pair of wires for its communication lines.


iii.

The master unit of the local bus is the radio and display receiver assembly.

HINT:
·

The radio and display receiver assembly has the resistance (108 to 132 Ω) necessary for communication.

·

If a short or open occurs in the local bus circuit, communication is interrupted and the system will not operate normally.





d.

CAN Communication Outline

i.

The navigation system uses CAN communication between the radio and display receiver assembly and ECUs.



e.

LVDS Communication Outline

i.

The navigation system uses LVDS communication between the radio and display receiver assembly and navigation ECU.


ii.

If a short or open occurs in the LVDS communication line, communication is interrupted and the system will not operate normally.




DIAGNOSTIC FUNCTION OUTLINE


a.

The audio and visual system has a diagnostic function (the result is indicated on the master unit).



MOBILE ASSISTANT FUNCTION OUTLINE (w/ Mobile Assistant Function)


a.

This function can be used when a compatible smartphone with an appropriate speech recognition application is connected to the radio and display receiver assembly via "Bluetooth".



EXPORT / IMPORT MEMORY POINT FUNCTION OUTLINE


a.

This function allows memory points stored in the radio and display receiver assembly to be registered to another radio and display receiver assembly. Memory points stored in the radio and display receiver assembly can be exported to a USB device. Data exported to a USB device can be imported to another radio and display receiver assembly using a USB device.



"Wi-Fi" OUTLINE


a.

"Wi-Fi" is divided into two functions described in the following table.

Function Description
Station Function* Function that connects the radio and display receiver assembly to an access point
P2P Function Function that connects the radio and display receiver assembly to another device directly

*: w/ "Wi-Fi" (Station) Function



b.

"Wi-Fi" is a worldwide wireless communication standard widely used as a short range communication tool.


c.

"Wi-Fi" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.


d.

The radio and display receiver assembly uses the 2.4 GHz frequency band for "Wi-Fi" communication.

HINT:

The communication performance of "Wi-Fi" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.




"Apple CarPlay" FUNCTION OUTLINE (w/ "Apple CarPlay" Function)


a.

The "Apple CarPlay" function is a function that enables the head unit to operate applications on a smartphone by connecting the smartphone to the head unit using a dedicated cable.

HINT:
·

Refer to the owner's manual included with the device for information about "Apple CarPlay" support.

·

Some applications have a display restriction in consideration of safe driving.





"Android Auto" FUNCTION OUTLINE (w/ "Android Auto" Function)


a.

The "Android Auto" function is a function that enables the head unit to operate applications on a smartphone by connecting the smartphone to the head unit using a dedicated cable.

HINT:
·

Refer to the owner's manual included with the device for information about "Android Auto" support.

·

Some applications have a display restriction in consideration of safe driving.





APPLICATION LINK FUNCTION OUTLINE (w/ Application Link Function)


a.

Application Link is a service that enables applications and content of a cellular phone to be displayed on and operated from the multi-display. As "Bluetooth" communication is used for the communication between a cellular phone and the radio and display receiver assembly, before using the Application Link service on the navigation system, the cellular phone needs to be registered to the navigation system as a "Bluetooth" device.

HINT:

Depending on the function, it may be necessary to connect via USB.




"Miracast" FUNCTION OUTLINE


a.

About "Miracast"

i.

"Miracast" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.


ii.

"Miracast" uses the "Wi-Fi" connection (P2P function) to display cellular phone and tablet screens on the multi-display and allows for audio on the cellular phone, etc., to be streamed through vehicle speakers.

HINT:
·

While driving only sound playback is supported. Videos are not displayed.

·

When Bluetooth audio and "Miracast" are connected simultaneously, audio output priority varies depending on the specifications of the device.

·

Bluetooth and "Miracast" and other "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, if Bluetooth audio and "Miracast" are connected at the same time some sound skipping and image distortion, etc., may occur.





b.

Supported devices

Supported mobile devices
·

Android cellular phones or tablets certified as "Miracast" compatible devices from the Wi-Fi alliance.

·

For details about "Miracast" compatibility, contact the cellular phone manufacturer.



HINT:
·

Depending on differences between models or software versions etc., some models might be incompatible with this system.

·

This function is not available if the smartphone is not certified by Wi-Fi Alliance as Miracast device.





SEARCH LEARNING ROUTE FUNCTION OUTLINE


a.

When this function uses the navigation function, if the user travels outside of the recommended route indicated on the navigation system a certain number of times under the same condition, the navigation system learns the user's travel pattern. After the navigation system learns the route, the learned route is used as the recommended route.

HINT:

When the map information is updated, the learned content by the function above may be reset.