Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY › from 2019.09
RM32H0E _58 Vehicle Interior _059623 SEAT _0292529 LUMBAR SUPPORT ADJUSTER ASSEMBLY A

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B458500

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·
B407261

Wear protective gloves. Sharp areas on the parts may injure your hands.



HINT:
·

Lumbar support adjuster assembly is available only on the driver side.

·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 79977A 1.INSTALL SEATBACK FELT

a.
B558485

Install the seatback felt to the lumbar support adjuster assembly.


Hide 72760D 2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY

a.
B458495

Install the 2 front seatback edge protectors to the lumbar support adjuster assembly.


b.
B458478C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the lumbar support adjuster assembly to the front seatback frame sub-assembly as shown in the illustration.


c.
B453971

Engage the claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.


d.

for Manual Seat:

i.
B453970

Engage the clamp.


ii.

Connect the connector.



e.

for Power Seat:

i.
B558459

Engage the clamp.


ii.

Connect the 2 connectors.



Hide 3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)

Hide 4.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)