Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER (for Manual Seat) › from 2019.09
RM32H0E _58 Vehicle Interior _059623 SEAT _0404460 FRONT SEAT CUSHION HEATER(for Manual Seat) G

SEAT  FRONT SEAT CUSHION HEATER(for Manual Seat)  INSPECTION  


PROCEDURE

Hide 87510L 1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

a.

Check the resistance.

i.
B460292C01
1.583,1.833 1.917,2.083 0.333,0.25 1.552,0.26 1.885,0.51 0.333,0.25 0.188,0.219 0.5,0.417 0.313,0.198 10 false *a 1.667,0.302 1.979,0.5 0.313,0.198 10 false A 1.698,1.885 2.01,2.083 0.313,0.198 10 false B
*a Component without harness connected
(Front Seat Cushion Heater Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-4 - A-5 Seat heater temperature 25°C (77°F) 4.93 to 5.07 kΩ
B-1 - B-2 Seat heater temperature 20°C (68°F) 2.99 to 3.59 Ω
A-2 - A-6 - B-2 Always Below 1 Ω


If the result is not as specified, replace the front seat cushion heater assembly LH.



Hide 87510K 2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

a.

Check the resistance.

i.
B460292C02
1.552,0.313 1.885,0.563 0.333,0.25 1.583,1.917 1.917,2.167 0.333,0.25 0.167,0.167 0.479,0.365 0.313,0.198 10 false *a 1.667,0.344 1.979,0.542 0.313,0.198 10 false A 1.698,1.948 2.01,2.146 0.313,0.198 10 false B
*a Component without harness connected
(Front Seat Cushion Heater Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-4 - A-5 Seat heater temperature 25°C (77°F) 4.93 to 5.07 kΩ
B-1 - B-2 Seat heater temperature 20°C (68°F) 2.99 to 3.59 Ω
A-2 - A-6 - B-2 Always Below 1 Ω


If the result is not as specified, replace the front seat cushion heater assembly RH.