Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › from 2019.09
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0295690 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Reverse Signal Circuit  


DESCRIPTION

The radio and display receiver assembly receives a reverse signal from the park/neutral position switch assembly.

WIRING DIAGRAM

E414766E06
4.948,2.031 6.656,2.5 1.708,0.469 10 false Radio and Display Receiver Assembly 4.958,1.865 5.417,2.063 0.458,0.198 10 false F129 5.417,1.094 5.875,1.292 0.458,0.198 10 false REV 5.146,0.99 5.458,1.188 0.313,0.198 10 false 28 0.5,1.083 2.583,1.802 2.083,0.719 10 false from Park/Neutral Position Switch Assembly

PROCEDURE

1.CHECK BACK-UP LIGHT
a.

Move the shift lever to R and check if the back-up lights come on.

OK:

The back-up lights come on.



Result:
Result Proceed to
OK A
NG (w/ Headlight ECU) B
NG (w/o Headlight ECU) C



A

2.CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL)

B

C

2.CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL)
a.
E385463C12
1.396,0.208 1.896,0.438 0.5,0.229 2.802,1.781 2.552,1.417 true 0.083,0.094 0.396,0.292 0.313,0.198 10 false *a 2.688,1.823 3.146,2.021 0.458,0.198 10 false REV 1.469,0.24 2.083,0.438 0.615,0.198 10 false F129
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)


Disconnect the F129 radio and display receiver assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F129-28 (REV) - Body ground Ignition switch ON
Shift lever in R
11 to 14 V
F129-28 (REV) - Body ground Ignition switch ON
Shift lever not in R
Below 1 V



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR