RM32H0E
_V1
General
_059376
SPECIFICATIONS
_0295172
8NR-FTS STARTING
F
SPECIFICATIONS 8NR-FTS STARTING SERVICE DATA
Starter Assembly (for Denso Made without Stop and Start System)
| Tester Connection
|
Condition
|
Specified Condition
|
| Battery positive (+) terminal - Terminal 30 - Terminal 50
|
11.5 V
|
Below 90 A
|
Magnet Starter Switch Assembly (for Denso Made without Stop and Start System)
| Tester Connection
|
Condition
|
Specified Condition
|
| Terminal 50 -Magnet starter switch assembly body
|
Always
|
Below 2 Ω
|
Starter Armature Assembly (for Denso Made without Stop and Start System)
| Tester Connection
|
Condition
|
Specified Condition
|
| Segment - Segment
|
Always
|
Below 1 Ω
|
| Segment - Starter armature core
|
10 kΩ or higher
|
| Commutator for runout
|
Maximum Runout
|
0.05 mm (0.00197 in.)
|
| Commutator diameter
|
Standard Diameter
|
25.0 mm (0.984 in.)
|
| Minimum Diameter
|
24.0 mm (0.945 in.)
|
| Undercut depth
|
Standard Undercut Depth
|
0.7 mm (0.0276 in.)
|
| Minimum Undercut Depth
|
0.2 mm (0.00787 in.)
|
Starter Brush Holder Assembly (for Denso Made without Stop and Start System)
| Brush length
|
Standard Length
|
11.6 mm (0.457 in.)
|
| Minimum Length
|
7.6 mm (0.299 in.)
|
Starter Assembly (for Valeo Made Cold Area Specification Vehicles)
| Tester Connection
|
Condition
|
Specified Condition
|
| Battery positive (+) terminal - Terminal 30 - Terminal 50
|
11.5 V
|
Below 145 A
|
Magnet Starter Switch Assembly (for Valeo Made Cold Area Specification Vehicles)
| Tester Connection
|
Condition
|
Specified Condition
|
| Terminal 50 - Terminal C
|
Always
|
Below 1 Ω
|
| Terminal 50 -Magnet starter switch assembly body
|
Below 2 Ω
|
Starter Assembly (for Valeo Made except Cold Area Specification Vehicles)
| Tester Connection
|
Condition
|
Specified Condition
|
| Battery positive (+) terminal - Terminal 30 - Terminal 50
|
11.5 V
|
Below 90 A
|
Starter Armature Assembly (for Valeo Made except Cold Area Specification Vehicles)
| Tester Connection
|
Condition
|
Specified Condition
|
| Segment - Segment
|
Always
|
Below 1 Ω
|
| Segment - Starter armature core
|
10 kΩ or higher
|
| Commutator length
|
Standard length
|
3.1 mm (0.122 in.)
|
| Maximum length
|
3.5 mm (0.138 in.)
|
| Undercut depth
|
Standard Undercut Depth
|
0.7 mm (0.0276 in.)
|
| Minimum Undercut Depth
|
0.4 mm (0.0157 in.)
|
Starter Brush Holder Assembly (for Valeo Made except Cold Area Specification Vehicles)
| Brush length
|
Standard Length
|
15.2 mm (0.598 in.)
|
| Minimum Length
|
12.2 mm (0.480 in.)
|
| Starter brush holder assembly resistance
|
Positive (+) brush - Negative (-) brush
|
10 kΩ or higher
|
Magnet Starter Switch Assembly (for Valeo Made except Cold Area Specification Vehicles)
| Tester Connection
|
Condition
|
Specified Condition
|
| Terminal 50 - Terminal C
|
Always
|
Below 1 Ω
|
| Terminal 50 -Magnet starter switch assembly body
|
Below 2 Ω
|
Engine Switch
| Tester Connection
|
Condition
|
Specified Condition
|
| 5 (SS1) - 6 (AGND)
|
Not pushed
|
10 kΩ or higher
|
| 1 (SS2) - 6 (AGND)
|
| 5 (SS1) - 6 (AGND)
|
Pushed
|
Below 1 Ω
|
| 1 (SS2) - 6 (AGND)
|
|
Battery positive (+) →Terminal 9 (SWIL) Battery negative (-) →Terminal 6 (AGND)
|
Illuminates
|
Ignition or Starter Switch Assembly
| Tester Connection
|
Condition
|
Specified Condition
|
| Between all terminals
|
LOCK
|
10 kΩ or higher
|
| 5 (AM1) - 7 (ACC)
|
ACC
|
Below 1 Ω
|
| 5 (AM1) - 7 (ACC) - 8 (IG1)
|
ON
|
Below 1 Ω
|
| 3 (IG2) - 4 (AM2)
|
| 5 (AM1) - 6 (ST1) - 8 (IG1)
|
START
|
Below 1 Ω
|
| 2 (ST2) - 3 (IG2) - 4 (AM2)
|
Starter Relay Assembly
| Tester Connection
|
Condition
|
Specified Condition
|
| 3 - 5
|
Battery voltage not applied to terminals 1 and 2
|
10 kΩ or higher
|
| Battery voltage applied to terminals 1 and 2
|
Below 1 Ω
|