Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81741B
1.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY
Connect the connector.
Engage the guides to temporarily install the side turn signal light assembly.
Engage the claw to install the side turn signal light assembly.
w/ Panoramic view monitor system:
Connect the connector.
|
Install in this Direction |
Engage the claws to install the door mirror foot light cover as shown in the illustration.
Install the screw.
87945
2.INSTALL OUTER MIRROR COVER
3.INSTALL OUTER MIRROR
4.PERFORM CALIBRATION (w/ Panoramic View Monitor System)