Home › Vehicle Exterior › LIGHTING (EXT) › BACK-UP LIGHT ASSEMBLY › from 2019.09
RM32H0E _59 Vehicle Exterior _060313 LIGHTING (EXT) _0406610 BACK-UP LIGHT ASSEMBLY G

LIGHTING (EXT)  BACK-UP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81220 1.INSPECT BACK UP LIGHT ASSEMBLY

a.

Check that the back-up light assembly.

i.
E329990C05
0.979,1.802 1.396,1.385 true 2.479,1.771 2.01,1.396 true 0.344,0.26 0.656,0.458 0.313,0.198 10 false *a 0.938,1.833 1.281,2.083 0.344,0.25 10 false B 2.51,1.813 2.854,2.063 0.344,0.25 10 false E
*a Component without harness connected
(Back-Up Light Assembly)


Apply battery voltage to the back-up light assembly and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Back-up light comes on


If the result is not as specified, replace the back-up light assembly.