Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM WARNING SWITCH (for RHD) › from 2019.09
RM32H0E _54 Brake _060040 BRAKE SYSTEM (OTHER) _0300038 VACUUM WARNING SWITCH(for RHD) A

BRAKE SYSTEM (OTHER)  VACUUM WARNING SWITCH(for RHD)  INSTALLATION  


PROCEDURE

Hide 83390H 1.INSTALL VACUUM WARNING SWITCH ASSEMBLY

a.

Install a new check valve grommet to the brake booster assembly.


b.
C368496C01
2.177,0.135 2.427,0.365 0.25,0.229 10 true *a 1.375,0.021 1.625,0.25 0.25,0.229 10 true *b
*a for TMC Made: 51° +/- 10°
for TMMT Made: 51° +/- 4°
*b Up


Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.


c.

Connect the connector to the vacuum warning switch assembly.


Hide 2.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY