These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication line.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | The clearance warning ECU assembly is unable to receive data from the ECM for 6 seconds or more | CAN communication system |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | The clearance warning ECU assembly is unable to receive data from the airbag sensor assembly for 1 second or more | CAN communication system |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | The clearance warning ECU assembly is unable to receive data from the steering sensor for 6 seconds or more | CAN communication system |
| U012987 | Lost Communication with Brake System Control Module Missing Message | The clearance warning ECU assembly is unable to receive data from the skid control ECU (brake actuator assembly) for 5 seconds or more | CAN communication system |
| U013187 | Lost Communication with Power Steering Control Module Missing Message | The clearance warning ECU assembly is unable to receive data from the power steering ECU with motor assembly for 1 second or more | CAN communication system |
| U014087 | Lost Communication with Body Control Module Missing Message | The clearance warning ECU assembly is unable to receive data from the main body ECU (multiplex network body ECU) for 5 seconds or more | CAN communication system |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | The clearance warning ECU assembly is unable to receive data from the combination meter assembly for 5 seconds or more | CAN communication system |
| U016487 | Lost Communication with HVAC Control Module Missing Message | The clearance warning ECU assembly is unable to receive data from the air conditioning amplifier assembly for 5 seconds or more | CAN communication system |
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.
Clear the DTCs
Check for CAN communication system DTCs
| Result | Proceed to |
|---|---|
| CAN communication system DTCs are output | A |
| No CAN communication system DTCs are output | B |
A
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING