Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIMPLE INTELLIGENT PARKING ASSIST SYSTEM › from 2019.09
RM32H0E _56 Audio / Visual / Telematics _060571 PARK ASSIST / MONITORING _0300931 SIMPLE INTELLIGENT PARKING ASSIST SYSTEM C

PARK ASSIST / MONITORING  SIMPLE INTELLIGENT PARKING ASSIST SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U013187  Lost Communication with Power Steering Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U016487  Lost Communication with HVAC Control Module Missing Message  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the clearance warning ECU assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area
U010087 Lost Communication with ECM/PCM "A" Missing Message Lost communication with ECM CAN communication system
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message Lost communication with yaw rate and acceleration sensor CAN communication system
U012687 Lost Communication with Steering Angle Sensor Module Missing Message Lost communication with steering sensor CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message Lost communication with skid control ECU CAN communication system
U013187 Lost Communication with Power Steering Control Module Missing Message Lost communication with power steering ECU with motor assembly CAN communication system
U014087 Lost Communication with Body Control Module Missing Message Lost communication with main body ECU (multiplex network body ECU) CAN communication system
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message Lost communication with combination meter assembly CAN communication system
U016487 Lost Communication with HVAC Control Module Missing Message Lost communication with air conditioning amplifier assembly CAN communication system

PROCEDURE

1.CHECK DTC OUTPUT
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

b.

Recheck for DTCs and check if the same DTC is output again.

Body Electrical > Clearance Warning > Trouble Codes
50001 438
OK:

No DTCs are output.


HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that caused the problem symptoms and perform the inspection again, even though DTCs were not output when rechecking for DTCs.




Result:
Proceed to
OK
NG



OK

NG