The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Note |
|---|---|---|---|---|---|
| B2414 | Steering Position Sensor | Sensor malfunction signals are continuously received from the steering sensor | Electronically controlled brake system | AFS | - |
Connect the GTS to the DLC3.
Turn the ignition swtich to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / AFS / Clear DTCs.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Connect the GTS to the DLC3.
Turn the ignition swtich to ON.
Wait 10 seconds or more.
Turn the GTS on.
Enter the following menus: Body Electrical / AFS / Trouble Codes.
Check for DTCs.
DTC B2414 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG