81265C
1.REMOVE NO. 1 MAP LIGHT LENS
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a molding remover A, disengage the claws and guide to remove the No. 1 map light lens as shown in the illustration.
81260C
2.REMOVE MAP LIGHT BULB
81260A
3.REMOVE MAP LIGHT ASSEMBLY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a molding remover D, disengage the clips and guide to remove the map light assembly as shown in the illustration.
Disconnect each connector.
86750A
4.REMOVE MAYDAY SWITCH ASSEMBLY (w/ Manual (SOS) Switch)