Home › Vehicle Interior › POWER OUTLETS (INT) › RELAY › from 2019.09
RM32H0E _58 Vehicle Interior _060996 POWER OUTLETS (INT) _0408374 RELAY G

POWER OUTLETS (INT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85530A 1.INSPECT POWER OUTLET SOCKET RELAY

a.

Check the resistance.

i.
A232574E24
2.313,0.76 1.938,0.479 true 2.896,0.677 3.208,0.469 true 2.792,1.115 3.188,1.115 true 2.802,1.594 3.177,1.594 true 1.823,0.385 1.927,0.542 0.104,0.156 10 1 3.271,0.385 3.375,0.542 0.104,0.156 10 2 3.229,1.531 3.333,1.688 0.104,0.156 10 3 3.24,1.042 3.344,1.198 0.104,0.156 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the power outlet socket relay.