Home › Drivetrain › K114 (MULTIDRIVE / CVT) › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM › from 2019.09
RM32H0E _52 Drivetrain _059616 K114 MULTIDRIVE / CVT _0292534 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM U

K114 MULTIDRIVE / CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


C239275E16
2.448,0.354 2.844,0.594 0.396,0.24 5.896,0.354 6.292,0.594 0.396,0.24 2.521,0.406 2.792,0.583 0.271,0.177 10 false C63 5.979,0.406 6.26,0.583 0.281,0.177 10 false A38

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A38-1 (BATT) - C63-59 (E1) R - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
A38-2 (+B) - C63-59 (E1) B - W-B Power source of ECM Ignition switch ON 11 to 14 V
A38-3 (+B2) - C63-59 (E1) B - W-B Power source of ECM Ignition switch ON 11 to 14 V
A38-9 (STP) - C63-59 (E1) R - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
A38-13 (CANH) - C63-59 (E1) GR - W-B CAN communication line Ignition switch ON Pulse generation
A38-23 (NSW) - C63-59 (E1) W - W-B Park/neutral position switch signal Ignition switch ON and shift lever in P or N Below 1 V
Ignition switch ON and shift lever not in P or N 11 to 14 V
A38-26 (CANL) - C63-59 (E1) P - W-B CAN communication line Ignition switch ON Pulse generation
A38-42 (SFTU) - C63-59 (E1) B - W-B Up-shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever in "+" Below 1 V
A38-43 (SFTD) - C63-59 (E1) LG - W-B Down-shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever in "-" Below 1 V
A38-46 (MREL) - C63-59 (E1) G - W-B EFI-MAIN NO. 1 relay Ignition switch ON 11 to 14 V
A38-59 (S) - C63-59 (E1) W - W-B M position switch signal Ignition switch ON and shift lever in M, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in M, "+" or "-" Below 1 V
C63-29 (+BM) - C63-59 (E1) P - W-B Power source of throttle actuator Always 11 to 14 V
C63-39 (SLP+) - C63-38 (SLP-) LG - R Shift solenoid valve SLP signal Engine idling Pulse generation
C63-41 (SC) - C63-59 (E1) W - W-B Shift solenoid valve SC signal
·

For 1 second after moving shift lever from P to D or R, or N to D or R

·

Lock-up ON to OFF


Pulse generation
C63-43 (SLU+) - C63-42 (SLU-) BR - LG Shift solenoid valve SLU signal Lock-up turned from OFF to ON Pulse generation
C63-45 (SLS+) - C63-44 (SLS-) B - L Shift solenoid valve SLS signal Engine idling Pulse generation
C63-59 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
C63-64 (R) - C63-59 (E1) R - W-B R position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
C63-65 (D) - C63-59 (E1) Y - W-B D position switch signal Ignition switch ON and shift lever in D, M, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, M, "+" or "-" Below 1 V
C63-67 (SL) - C63-59 (E1) GR - W-B Shift solenoid valve SL signal Lock-up operating Pulse generation
C63-69 (N) - C63-59 (E1) L - W-B N position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
C63-70 (P) - C63-59 (E1) B - W-B P position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
C63-79 (PTO) - C63-109 (EPTO) BR - P Oil pressure sensor signal Engine idling with shift lever in P 0.8 to 1.2 V
C63-110 (VCPT) - C63-109 (EPTO) G - P Power supply for oil pressure sensor Ignition switch ON 4.5 to 5.5 V
C63-125 (NTO) - C63-59 (E1) V - W-B Transmission revolution sensor (NT) signal When driving with shift lever in D Pulse generation
C63-126 (NTB) - C63-59 (E1) P - W-B Power supply for transmission revolution sensor (NT) Ignition switch ON 11 to 14 V
C63-123 (NIN+) - C63-124 (NIN-) V - L Transmission revolution sensor (NIN) signal When driving with shift lever in D Pulse generation
C63-127 (NOTO) - C63-59 (E1) G - W-B Transmission revolution sensor (NOUT) signal When driving with shift lever in D Pulse generation
C63-128 (NOTB) - C63-59 (E1) R - W-B Power supply for transmission revolution sensor (NOUT) Ignition switch ON 11 to 14 V
C63-129 (THO1) - C63-130 (ETHO) Y - BR CVT fluid temperature sensor signal CVT fluid temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V