Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER › 2018.05–2019.09
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0298052 REAR DOOR SPEAKER G

AUDIO / VIDEO  REAR DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160B 1.INSPECT REAR SPEAKER ASSEMBLY (for Type A)

a.

Check the resistance.

i.
E219303C78
1.167,1.698 1.656,1.969 true 1.156,2.406 1.656,2.281 true 0.177,0.146 0.573,0.469 0.396,0.323 10 false *a 1,1.604 1.135,1.792 0.135,0.188 10 false + 0.99,2.313 1.125,2.5 0.135,0.188 10 false -
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance (w/o Woofer):
Tester Connection Condition Specified Condition
1 (+) - 2 (-) Always 4.0 Ω


Standard Resistance (w/ Woofer):
Tester Connection Condition Specified Condition
1 (+) - 2 (-) Always 6.2 to 9.4 Ω


If the result is not as specified, replace the rear speaker assembly.



Hide 86160B 2.INSPECT REAR SPEAKER ASSEMBLY (for Type B)

a.

Check the resistance.

i.
E364209C35
1.25,1.604 1.563,1.313 true 2.146,1.594 1.875,1.292 true 0.073,0.063 0.344,0.292 0.271,0.229 12 false *a 1.177,1.615 1.344,1.76 0.167,0.146 10 false + 2.188,1.615 2.354,1.76 0.167,0.146 10 false -
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (+) - 1 (-) Always 4.0 Ω


If the result is not as specified, replace the rear speaker assembly.