Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING › 2020.08–2020.12
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298081 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75734C 1.INSTALL FRONT DOOR REAR OUTSIDE MOULDING (w/ Plated Moulding)

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new front door rear outside moulding.

i.

Remove the release paper from the front door rear outside moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B587971C01
1.052,0.635 0.604,0.365 true 2.896,0.729 2.719,0.656 false 0.427,0.25 0.74,0.406 0.313,0.156 10 false *a 2.938,0.698 3.25,0.854 0.313,0.156 10 false *b 1.198,0.427 1.396,0.594 0.198,0.167 10 true *c 2.729,0.25 3.042,0.406 0.313,0.156 10 false *d
*a Mark-off Line
*b Front Door Outside Moulding Edge
*c 2.3 mm (0.0906 in.)
*d 1.1 mm (0.0433 in.)


Install the front door rear outside moulding as shown in the illustration.



Hide 75392F 2.INSTALL OUTSIDE MOULDING RETAINER (for TMMT Made)

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new outside moulding retainer.

i.

Remove the release paper from the outside moulding retainer.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B458719C02
0.583,0.896 0.417,1.167 0.417,1.167 0.667,0.979 true 2.833,0.917 3,1.167 3,1.167 2.75,1 true 3.021,1.063 3.188,1.229 0.167,0.167 10 true *a 0.75,0.656 0.917,0.823 0.167,0.167 10 true *b 0.24,1.063 0.406,1.229 0.167,0.167 10 true *a 2.51,0.677 2.677,0.844 0.167,0.167 10 true *b
*a Mark-off Line
*b 4.0 mm (0.157 in.)


Install the outside moulding retainer as shown in the illustration.



Hide 75793 3.INSTALL FRONT DOOR UPPER OUTSIDE MOULDING PAD

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new front door upper outside moulding pad.

i.

Remove the release paper from the front door upper outside moulding pad.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B458720C07
2.719,0.573 2.417,0.833 2.417,0.833 2.927,0.698 true 0.969,0.458 1.167,0.583 1.167,0.583 0.885,0.542 true 2.219,0.76 2.385,0.927 0.167,0.167 10 true *a 1.063,0.208 1.375,0.365 0.313,0.156 10 false *b 2.833,0.365 3.146,0.521 0.313,0.156 10 false *c 1.177,0.458 1.344,0.625 0.167,0.167 10 false *a
*a Mark-off Line
*b 3.0 mm (0.118 in.)
*c 23.0 mm (0.906 in.)


Install the front door upper outside moulding pad as shown in the illustration.