Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA SYSTEM › from 2020.08
RM32H0E _51 Engine / Hybrid System _059516 CRUISE CONTROL _0441733 FRONT CAMERA SYSTEM D

CRUISE CONTROL  FRONT CAMERA SYSTEM  DTC CHECK / CLEAR  


CHECK FOR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes.

Chassis > Front Recognition Camera > Trouble Codes
50001 430

e.

Check for DTCs (Test Failed / Pending / Confirmed).

HINT:
GTS Display Description
Test Failed Represent malfunctions that were detected during the current trip.
Pending Represent malfunctions which have occurred since the DTCs were last cleared but have not been confirmed.
Confirmed Represent malfunctions which have occurred since the DTCs were last cleared and have been confirmed. (The number of trips since the DTC was stored may differ for each DTC.)

Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.




CLEAR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Front Recognition Camera / Clear DTCs.

Chassis > Front Recognition Camera > Clear DTCs
50002 430

e.

Clear the DTCs.

HINT:

Clearing the DTCs will also clear the freeze frame data.