CUSTOMIZE LTA
Record the settings when the vehicle is brought to the workshop so they can be restored.
Customizing with the Multi-information Display
Turn the ignition switch to ON.
Change the setting of the lane tracing assist system by operating the customize switch (steering pad switch).
Each lane tracing assist system item is displayed on the "Setting" tab on the multi-information display.
| Display | Description | Setting |
|---|---|---|
| Lane Center | Select ON/OFF for the lane centering function | ON/OFF |
| Sensitivity | Select the warning timing for the lane departure warning function | High/Std. |
| Sway Warning | Select ON/OFF for the vehicle sway warning function | ON/OFF |
| Sway Sensitivity | Select the warning sensitivity for the sway warning function | High/Std./Low |
Some lane tracing assist system functions are available only when other functions are operating or enabled. When the following switch and operating conditions are met, each of the lane tracing assist system functions are enabled.
| Dynamic Radar Cruise Control System | LTA Main Switch | Lane Center | Sway Warning | |
|---|---|---|---|---|
|
●: System/function operating ○: Turned/Set to On |
||||
| Lane Departure Warning Function | - | ○ | - | - |
| Lane Departure Restraint Function | - | ○ | - | - |
| Lane Centering Function | ● | ○ | ○ | - |
| Vehicle Sway Warning Function | - | - | - | ○ |