Home › Engine / Hybrid System › CRUISE CONTROL › LANE TRACING ASSIST SYSTEM › from 2020.08
RM32H0E _51 Engine / Hybrid System _059516 CRUISE CONTROL _0441734 LANE TRACING ASSIST SYSTEM C

CRUISE CONTROL  LANE TRACING ASSIST SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U010187  Lost Communication with TCM Missing Message  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U013187  Lost Communication with Power Steering Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  


DESCRIPTION

When a communication malfunction is detected between the forward recognition camera and an ECU or sensor, a DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U010087 Lost Communication with ECM/PCM "A" Missing Message When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the ECM continues for approximately 1 second or more. CAN communication system
U010187 Lost Communication with TCM Missing Message When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the ECM continues for approximately 8 seconds or more. CAN communication system
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message When the vehicle speed is 1 km/h or more, a communication error between the forward recognition camera and yaw rate and acceleration sensor (air bag sensor assembly) continues for 5 seconds or more. CAN communication system
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the steering sensor continues for approximately 1 second or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the skid control ECU (brake actuator assembly) continues for approximately 1 second or more. CAN communication system
U013187 Lost Communication with Power Steering Control Module Missing Message When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the power steering ECU assembly continues for approximately 1 second or more. CAN communication system
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the combination meter assembly continues for 8 seconds or more. CAN communication system

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Chassis > Lane Control > Clear DTCs
50002 418

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs
a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



b.

Using the GTS, check for DTCs.

Chassis > Lane Control > Trouble Codes
50001 418

Result:
Result Proceed to
DTC U010087, U010187, U012587, U012687, U012987, U013187 and U015587 are not output A
DTC U010087, U010187, U012587, U012687, U012987, U013187 or U015587 is output B



A

B