Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2020.08
RM32H0E _51 Engine / Hybrid System _059516 CRUISE CONTROL _0292294 ROAD SIGN ASSIST SYSTEM D

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE ROAD SIGN ASSIST SYSTEM


NOTICE:

Be sure to make a note of the current settings before customizing.


a.

Customizing with the multi-information display

i.

Turn the ignition switch to ON.


ii.

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" screen of the multi-information display.


Road Sign Assist Setup
Display Description Setting Default Relevant ECU
RSA Road sign assist function setting ON / OFF ON Forward recognition camera
Notification Method Above Speed Limit Excess speed notification method setting No Notification / Only Visual / Visual & Audible Only Visual Forward recognition camera
Overtaking*2 Overtaking prohibition notification method setting No Notification / Only Visual / Visual & Audible Only Visual Forward recognition camera
Others*2 Other notification method setting No Notification / Only Visual / Visual & Audible Only Visual Forward recognition camera
Notification Level Excess speed notification level setting*1 5 km/h /3 km/h /1 km/h 1 km/h Forward recognition camera
10 km/h (5 MPH) / 5 km/h (3 MPH) / 2 km/h (1 MPH) 2 km/h (1 MPH) Forward recognition camera

*1: The set vehicle speed differs depending on the country or area.

*2: except for models with the vehicle identification number on the certification label ending with character Q