AUTOMATIC LEARNING PERFORMED WHEN CABLE IS DISCONNECTED / RECONNECTED TO BATTERY TERMINAL
When the cable is disconnected / reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
·
Learning completes when vehicle is driven
| Effect/Inoperative Function When Necessary Procedures are not Performed
|
Necessary Procedures
|
Link
|
|
|
| Lane tracing assist system
|
Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 second or more.
|
( )
|
| Pre-collision system
|
| Simple intelligent parking assist system*1
|
| Parking support brake system*1
|
·
Learning completes when vehicle is operated normally
| Effect/Inoperative Function When Necessary Procedures are not Performed
|
Necessary Procedures
|
Link
|
Power door lock control system
|
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.
|
( )
|
| Air conditioning system
|
After the ignition switch is turned to ON, the servo motor standard position is recognized.
|
-
|