Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2020.08
RM32H0E _59 Vehicle Exterior _060313 LIGHTING (EXT) _0303031 AUTOMATIC HIGH BEAM SYSTEM D

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever a lighting system DTC is stored, the forward recognition camera stores the current vehicle state as freeze frame data.



CHECK FREEZE FRAME DATA


a.

Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes
50001 433

b.

Select a DTC to display its freeze frame data.

Body Electrical > Front Recognition Camera (Front Lighting Control)
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Total Distance Traveled Actual driven distance 0 to 16777215 Roughly the same as the actual driven distance -
Total Distance Traveled - Unit Actual driven distance unit km or mile Displays the current actual driven distance unit -
AHB/AHS Information Automatic high beam system or adaptive high beam system specification information Unknown, AHB or AHS Unknown: Specification not stored
AHB: w/ Automatic High Beam System
AHS: w/ Adaptive High Beam System
-


CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTCs will also clear the freeze frame data.


a.

Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Clear DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs
50002 433