Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2020.08
RM32H0E _51 Engine / Hybrid System _059516 CRUISE CONTROL _0297889 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  OPERATION CHECK  


INPUT SIGNAL CHECK


A376504C09
1.958,0.302 2.271,0.5 0.313,0.198 10 false *a 3.083,1.51 3.396,1.708 0.313,0.198 10 false *c 1.896,1.823 2.208,2.021 0.313,0.198 10 false *b 0.448,1.542 0.76,1.74 0.313,0.198 10 false *d
*a +RES
*b -SET
*c ON-OFF
*d CANCEL


a.

Connect the GTS to the DLC3.


b.

Check the cruise control main switch using the Data List function of the GTS (ON-OFF, -SET, +RES and CANCEL).

Click hereEngine / Hybrid System>CRUISE CONTROL>DYNAMIC RADAR CRUISE CONTROL SYSTEM>DATA LIST / ACTIVE TEST



INSPECT CRUISE CONTROL MAIN SWITCH (ON-OFF)


a.

Turn the ignition switch to ON.


b.
C403905C15
3.052,1.625 3.365,1.823 0.313,0.198 10 false *a
*a ON-OFF


Turn the dynamic radar cruise control system on using the cruise control main switch (ON-OFF).


c.
C367141C01
0.406,0.604 0.719,0.76 0.313,0.156 10 false *1 1.927,0.333 2.24,0.49 0.313,0.156 10 false *2
*1 Cruise Control Indicator
(Vehicle-to-vehicle Distance Control Mode)
*2 Multi-information Display


Check that the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly illuminates and "RADAR READY" is displayed on the multi-information display.


d.

Turn the cruise control system off using the cruise control main switch (ON-OFF). Check that the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly and "RADAR READY" on the multi-information display turn off.


e.

Turn the ignition switch off with the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly illuminated and "RADAR READY" on the multi-information display displayed. Turn the ignition switch to ON and check the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly and "RADAR READY" on the multi-information display are turned off.



INSPECT MODE SELECT


a.

Turn the ignition switch to ON.


b.
C403905C16
3.052,1.625 3.365,1.823 0.313,0.198 10 false *a
*a ON-OFF


Push and hold the cruise control main switch (ON-OFF button) for approximately 1.5 seconds. Check that the cruise control indicator (vehicle-to-vehicle distance control mode) in the combination meter assembly and "RADAR READY" on the multi-information display turn off and the cruise control indicator (constant speed control mode) illuminates.


c.
C367138C01
0.302,0.292 0.615,0.448 0.313,0.156 10 false *a 1.802,0.073 2.115,0.229 0.313,0.156 10 false *b 0.948,2.177 1.26,2.333 0.313,0.156 10 false *c
*a Cruise Control Indicator
(Vehicle-to-vehicle Distance Control Mode)
*b Multi-information Display
*c Cruise Control Indicator
(Constant Speed Control Mode)


Check that the cruise control indicator (vehicle-to-vehicle distance control mode) turns off and the cruise control indicator (constant speed control mode) illuminates.

NOTICE:

Do not push any other switches before pushing the cruise control main switch to MODE. If any other switch is pushed, turn the dynamic radar cruise control system off and repeat the procedure above.


HINT:

If a malfunction is detected, turn the ignition switch off and repeat the procedure above.




INSPECT STEERING PAD SWITCH ASSEMBLY


a.

Turn the ignition switch to ON.


b.
C403905C17
3.052,1.625 3.365,1.823 0.313,0.198 10 false *a
*a ON-OFF


Turn the dynamic radar cruise control system on using the cruise control main switch (ON-OFF).


c.
C367117C01
2.729,1.583 2.729,1.156 true 2.667,1.635 2.979,1.833 0.313,0.198 10 false *a
*a Distance Control Switch


Press the steering pad switch assembly (distance control switch).


d.

Check that the indicator of the vehicle-to-vehicle distance, which is shown on the multi-information display in the combination meter assembly changes from long to middle to short in that order.

HINT:

Long is automatically selected each time the ignition switch to ON.