Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › from 2020.12
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298067 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When removing the name plates, heat the vehicle body, back door outside garnish and name plates using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
·

Back Door Outside Garnish

·

Name Plate


20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body, back door outside garnish or name plate excessively.


PROCEDURE

Hide 75442A 1.REMOVE NO. 2 BACK DOOR NAME PLATE

a.
B458669C01
1.625,1.5 2.896,1.323 true 2.708,0.646 3.052,0.646 true 3.094,0.531 3.344,0.75 0.25,0.219 10 true *a 2.948,1.198 3.177,1.385 0.229,0.188 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 2 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 2 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 2 back door name plate to the back door outside garnish to remove the No. 2 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75441E 2.REMOVE NO. 1 BACK DOOR NAME PLATE

a.
B458674C01
2.729,0.583 3.094,0.542 true 1.979,1.365 2.781,1.021 true 3.135,0.427 3.375,0.625 0.24,0.198 10 true *a 2.823,0.885 3.063,1.083 0.24,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 1 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 1 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 1 back door name plate to the back door outside garnish to remove the No. 1 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75444A 3.REMOVE NO. 4 BACK DOOR NAME PLATE (for AWD)

a.
B458668C01
2.74,0.542 3.042,0.542 true 1.948,1.333 3.01,0.917 true 3.104,0.448 3.417,0.604 0.313,0.156 10 false *a 3.073,0.823 3.385,0.979 0.313,0.156 10 false *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 4 back door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and No. 4 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 4 back door name plate to the vehicle body to remove the No. 4 back door name plate.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the protective tape.


Hide 75431A 4.REMOVE NO. 1 BACK DOOR EMBLEM

a.
B458667C01
0.677,3.99 0.938,3.583 true 2.75,4.135 2.438,3.781 true 0.573,3.99 0.813,4.198 0.24,0.208 10 false *a 2.719,4.156 2.958,4.365 0.24,0.208 10 false *a
*a Location Pin
V100155

Protective Tape


Apply protective tape around the No. 1 back door emblem as shown in the illustration.


b.

Using a moulding remover D, separate the double-sided tape and disengage the location pins to remove the No. 1 back door emblem.

NOTICE:

Be careful not to damage the back door outside garnish.



c.

Remove the protective tape.


Hide 75441C 5.REMOVE BACK DOOR NAME PLATE (for GR SPORT)

a.
B591191C01
3.01,1.729 2.885,1.438 true 1.948,2.344 2.323,2.125 true 2.938,1.771 3.167,1.969 0.229,0.198 10 false *a 2.313,2.021 2.542,2.219 0.229,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the back door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the back door name plate to the vehicle body to remove the back door name plate.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the protective tape.